GH4184XSS1 Whirlpool Microwave - Parts

This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb,...Read more you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.

Most microwaves require 2 grease filters. Sold individually.

This tray is rotated when the microwave is turned on.

This part protects the microwave by shutting it off if there is an electrical surge.

This part allows power to go one way but not the other.

This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because proper operation of the microwave’s shielding and interlock system is essential for user safety, this part should be installed by a qualifie...Read mored service technician. After installation, the interlock switches and microwave shielding must be thoroughly tested to ensure the appliance meets safety standards.

This assembly includes the damper door and frame.

This support ring sits underneath the glass turntable tray.

This screw is sold individually.

This part is plastic with a stainless color finish and comes with the clips needed to mount the grill. The actual stainless steel option is no longer available.

Sold individually.

This small but important switch helps keep your microwave safe by making sure it won’t run unless the door is properly closed. It tells the microwave’s control system whether the door is open or shut, helping prevent accidents and ensuring everything works as it should. If your microwave isn’t starting or heating, this part might be the f...Read moreix you need. Installing it usually involves opening the microwave’s outer panel and replacing the switch near the door latch—just be sure to unplug the unit first and follow safety steps.