My Orders
- Home
- GH4155XPS0
- Instructions
GH4155XPS0 Whirlpool Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grille was not attached by previous contractor (they just leaned it in place) We were to clean up and ofcourse when it was touched to the floor it went.
0 of 1 people
found this instruction helpful.
-
Michael from Hebron, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
Repair was very easy. We were more impressed with your selection and ordering process. Very quick as was needed for this job to be completed. Our customer was impressed that we found the part and that we were able to get it in so quickly. You helped us continue our professional service. Thank You
Was this helpful?
Thank you for voting!
Vent Grille broke
0 of 1 people
found this instruction helpful.
-
Rodney from Midland, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I place the vent in the opening, put the screws in place, tightened the screws and viola.
Was this helpful?
Thank you for voting!
broken
0 of 1 people
found this instruction helpful.
-
Donald from Pompano Beach, FL
- Really Easy
- Less than 15 mins
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...
Was this helpful?
Thank you for voting!
Vent Grille Cracked and broke at top screws attached area.
0 of 1 people
found this instruction helpful.
-
Mary Jean from Elkridge, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
Fitted the grille in place and tightened the screws to hold in place.
Was this helpful?
Thank you for voting!
Foreclosed home: parts were missing
0 of 2 people
found this instruction helpful.
-
OLIV from OAKLEY, CA
- Really Easy
- Less than 15 mins
Having the correct model number helps:
Just place the parts in the microwave and it worked.
Just place the parts in the microwave and it worked.
Other Parts Used:
Was this helpful?
Thank you for voting!
Microwave had no electrical
1 of 5 people
found this instruction helpful.
-
Larry from HARKER HTS, TX
- Really Easy
- 30 - 60 mins
-
Pliers
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Was this helpful?
Thank you for voting!
Burnt Out Light Bulb Replacement
9 of 30 people
found this instruction helpful.
-
alfred from summerville, SC
- Easy
- Less than 15 mins
-
Screw drivers
Open compartment, installed bulb, closed compartment
Was this helpful?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
0 of 4 people
found this instruction helpful.
-
Herb from Auburn, IN
- A Bit Difficult
- 1- 2 hours
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Was this helpful?
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 people
found this instruction helpful.
-
Stephen from SPRINGFIELD, WV
- Very Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
The microwave door would not stay latched, so it wouldn't come on.
2 of 12 people
found this instruction helpful.
-
George from Maceo, KY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and r
... Read more
eplaced the covers I had removed and it was working again!
Read less
Was this helpful?
Thank you for voting!
old vent grille brackets broke off
-
Andrea from Fresno, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Super easy! Just unscrewed remainder of the vent grille, saving the old screws as instructed on other reviews I read, and replaced vent grille with perfectly fitting new one...whole process took 15 min (while 9 months pregnant with a toddler hanging on my leg!) And partselect sent the piece with regular shipping in 2 days!
Was this helpful?
Thank you for voting!
Replacement
-
George from Statham, GA
- Really Easy
- Less than 15 mins
Easy, perfect
Was this helpful?
Thank you for voting!
Part missing
-
Cheryl from Chula Vista, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
This rental unit was missing the vent grille for the mounted microwave. It was super simple to install and makes the microwave look like new.
Was this helpful?
Thank you for voting!
Broken plate
-
JASON from ABSECON, NJ
- Really Easy
- Less than 15 mins
Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.
Was this helpful?
Thank you for voting!
Did not have a mounting plate with our used microwave
-
Megan from Elverson, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband just installed the mounting plate on the wall and the microwave was placed in position and mounted in less than 5 minutes.
Was this helpful?
Thank you for voting!