My Orders
- Home
- GFSL6KKYALS
- Instructions
GFSL6KKYALS General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Filter needed replacing
-
Randell from Rancho Cucamonga, CA
- Really Easy
- Less than 15 mins
Very easy, unscrew and re-screw new filter in..
Was this helpful?
Thank you for voting!
Factory installed rail was overtightened and fractured the rail. Subsequent use resulted in rail failure.
-
Jared from Sandy, UT
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove drawers and internal shelf supported by rail(no tools). Remove rail (phillips). Remove roller from existing rail. Intall roller on new rail. Install new rail (phillips). Replace shelf and drawers. Note: New roller (identified as a separate part) and screws are not included with rail.
Was this helpful?
Thank you for voting!
water filter was aged and needed a replacement
-
Richard from La Grande, OR
- Really Easy
- Less than 15 mins
unscrew filter and replace the new one
Was this helpful?
Thank you for voting!
We needed a new water filter.
-
Dan from Surprise, AZ
- Really Easy
- Less than 15 mins
We received the part just a few days after ordering, unscrewed the old filter by hand, and installed the new filter the same way.
Was this helpful?
Thank you for voting!
Water filter needed replacement
-
Natalia from Mount Pleasant, SC
- Really Easy
- Less than 15 mins
Removed the old filter. Filled the new one with water and put it in theplace of an old one. Flushed the system with 1 gallon of water.
Was this helpful?
Thank you for voting!
Evaporator freeze up
-
Peter from Homer Glen, IL
- Really Easy
- 1- 2 hours
-
Screw drivers
Pulled off the evaporator cover and replaced the Temp sensor.
Was this helpful?
Thank you for voting!