GFSL6KEXBLS General Electric Refrigerator - Instructions

Its really easy. Just take out all the drawers and shelves so that you can access the evap cover. Remove 4 screwa holding assy on ( be careful to defrost first ). Replace with new assy, and reassemble shelves and drawers. Done.

Pulled off the evaporator cover and replaced the Temp sensor.

Easy, with included video and instructions

My 14 year old Son

It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.

exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not

easy slide out and put new one

Very easy, unscrew and re-screw new filter in..

Remove drawers and internal shelf supported by rail(no tools). Remove rail (phillips). Remove roller from existing rail. Intall roller on new rail. Install new rail (phillips). Replace shelf and drawers. Note: New roller (identified as a separate part) and screws are not included with rail.

unscrew filter and replace the new one

We received the part just a few days after ordering, unscrewed the old filter by hand, and installed the new filter the same way.

Removed the old filter. Filled the new one with water and put it in theplace of an old one. Flushed the system with 1 gallon of water.

Put new lid in place and snapped it in.

Folowed instructions

none required