GFSF6KKXBWW General Electric Refrigerator - Instructions

All Instructions for the GFSF6KKXBWW
76 - 81 of 81

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
icemaker working poorly, almost not at all
  • Paul from Chesterfield, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I looked at the parts online on Part Select, and determined that the most likely culprit was the icemaker unit itself. The other components did not appear likely to be at fault. Although it cost a bunch ($176)I figured it would be a lot cheaper than hiring someone to come in. The part came amazingly fast, via FedEx second day I think, and I simply looked at the part, and figured out to depress the tabs at the top while pulling the unit toward the front of the fridge, and it came out with moderate effort. One phillips head screw held the door at the left which once removed, allowed the electrical cord to be released after pressing the clip to release the catch. Installation was the reverse, and went really fast. Once connected, the icemaker began making ice after about 1/2 hour, then never stopped after that. Repair complete!! Very pleased.
Was this helpful?
Thank you for voting!
Filter needed replacing
  • W Craig from Diamondhead, MS
  • Really Easy
  • Less than 15 mins
Folowed instructions
Was this helpful?
Thank you for voting!
replaced filter
  • donnie from metairie, LA
  • Really Easy
  • Less than 15 mins
none required
Was this helpful?
Thank you for voting!
on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke
  • david from bridge city, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds
Was this helpful?
Thank you for voting!
Spring broke
  • Sharol from Culdesac, ID
  • Really Easy
  • Less than 15 mins
Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.
Was this helpful?
Thank you for voting!
Evaporator freeze up
  • Peter from Homer Glen, IL
  • Really Easy
  • 1- 2 hours
  • Screw drivers
Pulled off the evaporator cover and replaced the Temp sensor.
Was this helpful?
Thank you for voting!
All Instructions for the GFSF6KKXBWW
76 - 81 of 81