- Home
- GFSF6KEXEBB
- Instructions
GFSF6KEXEBB General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Poor water and ice taste, filter a few years old.
-
David from San Antonio, TX
- Really Easy
- Less than 15 mins
Very simple, I followed instructions sent with the filter. Twisted old filter clockwise 1/4 turn to remove. Filled new filter with water, lined up arrow on filter to arrow on refrigerator, and then turned 1/4 turn counterclockwise. Filter raised and seated itself. Wiped few drops of water from refrigerator shelf.
Was this helpful?
Thank you for voting!
Filter needed replacing
-
W Craig from Diamondhead, MS
- Really Easy
- Less than 15 mins
Folowed instructions
Was this helpful?
Thank you for voting!
replaced filter
-
donnie from metairie, LA
- Really Easy
- Less than 15 mins
none required
Was this helpful?
Thank you for voting!
on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke
-
david from bridge city, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds
Other Parts Used:
Was this helpful?
Thank you for voting!
Spring broke
-
Sharol from Culdesac, ID
- Really Easy
- Less than 15 mins
Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.
Was this helpful?
Thank you for voting!
replace water filter
-
Richard from Waynesboro, PA
- Easy
- Less than 15 mins
Easy, with included video and instructions
Was this helpful?
Thank you for voting!
Change Filter
-
GREGORY from SACRAMENTO, CA
- Really Easy
- Less than 15 mins
My 14 year old Son
Was this helpful?
Thank you for voting!
Ice and Water Filter needed replacement
-
Irene from Tigard, OR
- Really Easy
- Less than 15 mins
It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.
Was this helpful?
Thank you for voting!
did not need adapter
-
terry from fort worth, TX
- Really Easy
- Less than 15 mins
exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not
Was this helpful?
Thank you for voting!
crack by the middle of vegi drwaer
-
Carole from Sunrise, FL
- Really Easy
- Less than 15 mins
easy slide out and put new one
Was this helpful?
Thank you for voting!
Filter needed replacing
-
Randell from Rancho Cucamonga, CA
- Really Easy
- Less than 15 mins
Very easy, unscrew and re-screw new filter in..
Was this helpful?
Thank you for voting!
Factory installed rail was overtightened and fractured the rail. Subsequent use resulted in rail failure.
-
Jared from Sandy, UT
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove drawers and internal shelf supported by rail(no tools). Remove rail (phillips). Remove roller from existing rail. Intall roller on new rail. Install new rail (phillips). Replace shelf and drawers. Note: New roller (identified as a separate part) and screws are not included with rail.
Was this helpful?
Thank you for voting!
water filter was aged and needed a replacement
-
Richard from La Grande, OR
- Really Easy
- Less than 15 mins
unscrew filter and replace the new one
Was this helpful?
Thank you for voting!
We needed a new water filter.
-
Dan from Surprise, AZ
- Really Easy
- Less than 15 mins
We received the part just a few days after ordering, unscrewed the old filter by hand, and installed the new filter the same way.
Was this helpful?
Thank you for voting!
Water filter needed replacement
-
Natalia from Mount Pleasant, SC
- Really Easy
- Less than 15 mins
Removed the old filter. Filled the new one with water and put it in theplace of an old one. Flushed the system with 1 gallon of water.
Was this helpful?
Thank you for voting!