GDWT358V00ES General Electric Dishwasher - Instructions

Contacted PartsSelect online on Thursday. Saturday the parts arrived. My son and I pulled the old connectors off the wheels and snapped the new ones in place. Then he snapped all the wheels onto the rack. DONE. I still find myself wanting to lift the rack now but the wheels are on and I am happy. All around EXCELLENT. Thank you.

I inserted wheel axle into wheel and attached to bottom rack axle. It was simple. No problems.

I hand removed the snap in wheel axels and replaced the axles with new ones, by hand, no tools needed. On this dishwasher basket the wheeel axels just snap onto the metal cage "wires" of the roll out basket holding the dishes. Very simple. Used pliers to squeeze each old axle retaining nubs,from each of the eight wheels, , then just slipped (pulled the wheels off the axles) and discared only axles (that here the problem, detaching frequently from grasping the pull out dish basket, due to heat taking the temper out of their gripper (to basket).

Very easy, saw the parts I needed online, ordered them, and installed them. Easier than I thought. Saved probably $200 in having a repair man come to the house. Outstanding results! Thank you!

My husband took off all the wheels and changed the axles. We had friends who had the same problem and they led us to your web site.

Remove all wheels on one side. Use pliers to remove broken axles from wheels. Pop in new axles, then go to lower rack and attach to rack by pushing axle pinch mechanism onto rack support. New axles do not look like old ones—they are improved.

Used plier to pinch the axle head to take the old wheels off then pushed the new wheels on by hand.

Just pulled the old axles out and snapped the new ones in and slid them on. Wish all household repairs were this easy.

First, remove the bottom front covers (two parts four screws). Second, remove the two screws at the top that secure the dishwasher to the counter. Third, gently pull away the dishwasher from underneath the counter just far enough to see and be able to remove the door spring(s) - one on each side. Fourth, remove the existing hinge arm link(s) if not already broken off, replace with the new one(s). Note that the door hinge goes on the door (front) side of the spring and the other side fits into a groove on the door arm - the other end of the spring attaches to one of the 3 available holes on the frame at the bottom. It would be a good idea to replace the hinge arm links on both sides even if only one is broken. Make sure that the door has the right tension (each spring can be hooked in 1 of 3 holes to adjust the tension). Then gently push the dishwasher back under the counter. Finally, replace the screws under the counter and replace the covers on the bottom front. All of this should take no more than 15-20 minutes. This was an easy job!

I replaced the wheels and axels with the ones I bought and now it is fine.

Rolled rack out-took a wheel off, put new one on without any tools. Then did the other five. This was easiest repair job in years

pop of the old, pop on the new! Wife happy, Priceless

Replacement parts were better than original thanks

Replaced all 8 of the wheels and axles (the old axles wouldn't hold the wheels in place any longer). Replaced the tub gasket because of cuts from knives. Both fixes were relatively easy to do, although directions for the tub gasket would have been nice!

I set the rack upside down on the counter. Snapped the new axles into the new wheels. Snapped the wheels onto the rack. The new style axles are better than the factory parts. They look different in the picture so I was not sure if I was getting the right thing but they worked great. Took longer to take the parts out of the bags than to install. Nice to have the rack slide in and out properly again.