1. Home
  2. GDF450PGR5WW
  3. Instructions

GDF450PGR5WW General Electric Dishwasher - Instructions

All Instructions for the GDF450PGR5WW
31 - 45 of 48

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
All 3 spray arms were stoped up.
3 of 5 people found this instruction helpful.
  • Kenneth from SEBRING, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Replaced all 3 spray arms in less than 10 minutes.The top one came in two pieces,the mounting bracket and the arm.Snap the bracket on the dishwasher first , then attach the arm to the bracket.
Was this helpful?
Thank you for voting!
The lower dishwasher rack was rusting out. The rubber/epoxy coating was coming off causing rack to rust out.
2 of 2 people found this instruction helpful.
  • Chris from LAS VEGAS, NV
  • Very Easy
  • Less than 15 mins
Removed the old lower rack and slide the new one in.
Was this helpful?
Thank you for voting!
Upper rack rusted out
2 of 2 people found this instruction helpful.
  • James from OMAHA, NE
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Took out the old and swapped out the parts from the old one and put them on the new rack. Looks great and works great.
Was this helpful?
Thank you for voting!
roller wheel was melted.
2 of 2 people found this instruction helpful.
  • Julian T from Dalton, GA
  • Really Easy
  • 30 - 60 mins
I removed the old roller wheels and the new roller wheels snapped together and the simple instructions made the repair quick and simple..
Was this helpful?
Thank you for voting!
Old rack had rusted and broken tines
2 of 2 people found this instruction helpful.
  • Andrew from WINONA, MN
  • Really Easy
  • 15 - 30 mins
1. Take a picture of the old rack in the dishwasher! Just in case!
2. Remove rail channel end caps and place them on the tabletop on the correct side to make sure you put them back on the correct side.
3. Remove old rack.
4. Carefully snap off the water sprinkling unit. (carefully push down tabs so they don't break).
5 . Using your picture as a reference (!) snap the water sprinkling unit on the new rack (it's easy).
6. Put the new rack back onto the rail channel and replace the end caps.

Done! Very easy installation ! Rack was not nearly as expensive as I anticipated and was delivered quickly. Note: You get the rack only. All ot the other parts are from the old unit.
Read less
Was this helpful?
Thank you for voting!
Lower try rusting out
1 person found this instruction helpful.
  • Ronald from cherry hill, NJ
  • Really Easy
  • 30 - 60 mins
Part was incorrect Compare that to GE site saying number on both ports to different parts try to return was half the course of what I paid ridiculous So apparently I'm stuck with it Check GE site you'll see the port is different from what your sound but the numbers are exactly the same No clips to support the utensil tray
Was this helpful?
Thank you for voting!
Lower dishwasher spinning arm not working
1 person found this instruction helpful.
  • Patricia from Fruita, CO
  • Very Easy
  • Less than 15 mins
Super easy repair. Took off the spinning arm, removed the Diverter Assembly (no tools required), and reassembled.
Was this helpful?
Thank you for voting!
Lower arm spay was breaking apart
1 person found this instruction helpful.
  • Carol from Toms River, NJ
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Followed instructions used flat head screwdriver to unlach old arm. Took out and put in new spray arm. Really easy
Was this helpful?
Thank you for voting!
snapped new spray arm in place
1 person found this instruction helpful.
  • Timothy from Pedro, OH
  • Very Easy
  • Less than 15 mins
snapped new spray arm in place
Was this helpful?
Thank you for voting!
Top tray rusting
1 person found this instruction helpful.
  • Leland from Celina, TX
  • Very Easy
  • Less than 15 mins
Ordered new one, pulled old off, pulled arm off, attached new tray and attached washer arm. Easy!
Was this helpful?
Thank you for voting!
The original rack was deteriorated and staining dishes.
1 person found this instruction helpful.
  • john from FT WASHINGTON, MD
  • Very Easy
  • Less than 15 mins
Replaced old rack.
Was this helpful?
Thank you for voting!
as better as it gets
1 person found this instruction helpful.
  • Praveen from Monroe Township, NJ
  • Really Easy
  • Less than 15 mins
the part is OEM and fits like a glove. No worries. There is a minor variation in design and is not like for like design but fits exactly per specs and works. I have been looking for this part for years now. Thank you for PS for maintaining the inventory.
Was this helpful?
Thank you for voting!
Rusty DW Baskets
1 person found this instruction helpful.
  • PRAVEEN from MONROE TWP, NJ
  • Really Easy
  • Less than 15 mins
the part is OEM and fits like a glove. No worries. There is a minor variation in design and is not like for like design but fits exactly per specs and works. I have been looking for this part for years now. Thank you for PS for maintaining the inventory.
PS12743260Manufacturer Part Number WD28X26099
Was this helpful?
Thank you for voting!
Rusty Lower Rack
1 person found this instruction helpful.
  • Susan from MASON, OH
  • Very Easy
  • Less than 15 mins
Removed lower rack, slid in new Rack.
Was this helpful?
Thank you for voting!
Rusty upper rack
1 person found this instruction helpful.
  • Francesca from PALM COAST, FL
  • Very Easy
  • Less than 15 mins
I simply followed the video instructions and replaced the rack myself, no tools required. Easy peasy
Was this helpful?
Thank you for voting!
All Instructions for the GDF450PGR5WW
31 - 45 of 48