FWT449GFS2 Frigidaire Washer - Parts

This part is found on the door of your washer and keeps your door closed for use.

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.

This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assem...Read morebly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.

This drain pump helps your washer get rid of water during the cycle. If your machine isn’t draining properly or leaves water behind, this part could be the fix. It’s made to fit many front-load models and works with several well-known brands. Easy to install with basic tools—just be sure to unplug the washer first.

This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.

If your washer isn’t filling properly, leaking, or not cleaning clothes like it should, the water inlet valve might be the issue. This part controls how hot and cold water flows into your machine. It’s easy to install and comes with the bracket and screws you need. Just make sure it fits your model, and turn off the power and water before starting.

This washer tub-to-pump hose is designed to carry wastewater from the tub to the drain pump during wash and spin cycles, helping ensure efficient draining. It also includes a built-in trap that catches small items like coins or debris, helping protect the pump from damage. Made from durable rubber, it is an ideal replacement if the hose b...Read moreecomes cracked, blocked, or starts leaking, restoring proper drainage and reliable washer performance.

Also known as a Drum Baffle. Sold individually.

This timer knob assembly is a manufacturer-approved replacement part for your washing machine. This is an easy repair which requires no tools. Simply unscrew the existing knob, which may take some force or wiggling, and screw in the new one.

This door bellow kit forms a watertight seal between the drum and door of front-load washers, allowing the tub to spin freely while preventing leaks. It fits a variety of models and is commonly replaced when water leaks, the door doesn’t seal properly, or the washer makes unusual sounds. Installation restores proper sealing and helps maintain efficient washer performance.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.