FRS23ZTJB2 Frigidaire Refrigerator - Instructions

First I turned off the water supply to the frig and raised the bar in the ice make to stop the production of ice. I used the nut driver to remove 3 screws from the housing. I removed the connections from the two water lines & removed the broken housing. I attached the water lines to the new housing and then screwed it back into the refrigerator. I replaced the filter and screwed the filter cup into the housing. Turned on water & ice maker, then ran water thru the door dispenser to check to see if I had done it correctly. No leaks !!! Yeah....I was done !!!

Popped off the front plastic cover on the bottom of the fridge, under the doors. Two screws held the defrost timer on under the front side of fridge (below freezer door). You can't really see the timer except for the adjustment knob that is accessible through a hole. Once the screws are removed, disconnect the wire plug and remove and replaced unit. Works fine ever since.

I located the part that was the culprit as it had buzzed very much before quitting. This is an easy removal as the part is in a two prong jack and just needs to be carefully removed with the new part inserted back in the jack provided. The refrigerator works fine now, but the run capacitor will still buzz on start up of the compressor. I do hope this is normal in this model? anyway it runs fine mow. Thank you.

Remove back panel inside Freezer compartment remove 2 screws that hold (small) fan motor. Unplug electric motor supply and install new motor in reverse order

First I remove protection cover,then removed the elbow pressing in on the gray coupling housing at each end of the elbow.Mark each piece of water hose before removing the elbow with marker(black)it helps when replacing new elbow.The new elbow slides on each end of water hose ,connect the end to the hose coming out of the door first. Replace protection cover. No more leak.

I called Part Select and ordered a new drawer. They got the item to me within 3 days! I would definitely recommend them to a friend.

I slid upward and disengaged the front cover off the old drawer. Slid down the same front cover on the new one, slid the drawer in and it was like new again.

Initially i though this whole thing would take weeks, The website provided detailed exploded views, I ordered the part and it arrived in 2 days. It was too easy.

door handle off but 2 screws top and bottom of handle that attach to door remained under top and bottom molding. had to remove molding which was tricky. Held onto door with plastic clips which several broke when trying to get molding off. Figured out I had to tap top molding up to remove. unscrewed pieces of door handle and attached new handle. Had to use contact cement to secure molding to door where clips had broken.

took the shelves out, unscrewed the rear panel,unpluged the thermistat and uncliped it from the line.Replaced with new thermistat in the reverse order. Before turning the unit back on,allowed the coils to defrost.All of the process was shown in your vidio that I was able to view while ordering the part. Thank you

removed ice maker box and disassembled crusher unit on front of box and installed new housing.

It was a dark and stormy night.....

Husband: AArrgghhh - we need a new refrigerator !!
WIfe: Nope, we just need to fix this one, and I know just how to do it. (partselect.com)
Husband: (of little faith) Fine, miss smartypants, go for it...

0) Wife orders correct parts from partselect.com and they arrive 3 days later.
1) Wife manually removed the two old drawers and the Cover-storage pan (has drawer guides)
2) Wife attempts (unsuccessfully) to remove glass frontpiece from old drawer to put on new one.
3) Husband: "Lemme see that ...
4) WIfer (reluctantly): ...uh.. OK...
5) Husband puts drawer on counter and whacks it with his fist after disloging the front panel with a butter knife.
5) Wife (amazed) wow-nothing broke!
6) Husband repeats process and breaks the second front panel
7) WIfe (silently) Oh darn and shoot
8) Husband (verbally) *&%#!!!
9) WIfe (brightly) That's OK - I can glue it. No Problemo!!
10) WIfe (silently) *&%!!
11) Wife assembles old front panel onto first storage drawer
12) Wife cheerfully glues old front panel #2, prays, then assembles it onto second storage drawer.
13) Wife puts cover-storage-pan in refrigerator and slides top drawer in, noticing more friction and more play than ususal.
14) Wife notices that wheels are not included in the cover-storage-pan
15) Husband: Now we are S.O.L. for sure. We need to buy a new refrigerator.
16) Wife (OK, smugly) repairs herself to the storage shed, where she has cleverly kept the old part, which still has the wheels on it.
17) Wife removes wheels from old part and installs them onto new part without breaking anything.
18) Wife installs both drawers and is inspired to clean out the newly restored refigerator.
19) Husband (amazed) admits that family does not need to buy a new refrigerator after all
20) Teenage daughter emerging from her room in a daze, "Hey, is that a new refrigerator?"
21) Wife makes plans to spend remainder of budget that would be used to buy new refrigerator on pearl ring that she has been coveting.
22) AND THEY LIVED HAPPILY EVER AFTER....

got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!

Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.

I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refrigerator.
It took me about 5 to 10 minutes. It's really easy!

Pull out the unit from the wall, Unplugged the frig, removed the lower cover panel. Remove 2 screws holding the water valve from the unit, then removed the 2 connectors that turn on the relays. Connected the connectors to the new valve, then replaced inside of unit and replaced the lower back panel cover, plugged it back in, then tested the water flow at the spout, and waitied for the ice maker to kick in. Worked perfectly.