My Orders
- Home
- FRA156MT10
- Instructions
FRA156MT10 Frigidaire Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Unit condenser won't turn off
3 of 7 people
found this instruction helpful.
-
Lisa from CRESTVIEW, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Took old part off and replaced after cleaning the coils but it didn't fix it .Now have to figure out what's next.
Was this helpful?
Thank you for voting!
Fan blade broken when purchased Vibration very bad
4 of 13 people
found this instruction helpful.
-
Don from Tomball,, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Socket set
Removed Window Air Conditioner from box purchased New. Plastic Fan Blade was broken when purchased and Appliance store would not repair. Second phase removed cover from the fan area removed and replaced fan blade replaced cover and reinstalled unit into the window case.
Was this helpful?
Thank you for voting!
The PC board had water damage was shorted out .
-
Joe L. from Philadelphia, PA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Removed front cover of the unit.removing screws and disconnecting display board from PC board harness . Making shore unit was not plugged in. Pulling unit from casing located pc board box removed cover. Using phillip screwdriver removed PC board from mounting plate . Removed 1 wire at a time and placed in same position on new PC board . W
... Read more
hen I was finish with the wires mounted new pc board on bracket then back to the box secured all hsrdware back in place.front cover connecting display board. Air conditioner works like new! Thanks for your help in getting the part I needed . It came one day later than exspected but im cool and happy.
Read less
Was this helpful?
Thank you for voting!