All Installation Instructions for Frigidaire Refrigerator FGSS2635TP6

Cracked in the middle

Slid the meat pan out of the fridge, popped the glass from under and removed it, popped the front of shelf upward and then slid it out, and for the new one I did everything in reverse that’s it took me less than 10 minuets.

Parts Used:

Refrigerator Shelf Frame (Glass not included)

robert from compton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

plastic frame broke in front needed replaced

Well I’ve been cleaning refrigerators for 50 years... so have experience removing shelves etc., for cleaning....I removed shelf and then glass and put new one in........easy peasy

Parts Used:

Refrigerator Shelf Frame (Glass not included)

Roxie from PORT ST LUCIE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Both frames had broken in the front

Had to remove the refrigerated items off the crisper shelf to remove the glass, next removed the drawer to remove the crisper frame, then removed the middle drawer glass to remove the drawer, then the frame, installed the new frame cleaned the glass, re-installed the middle drawer, and continued the installation steps reverse of the removal process.

Parts Used:

Refrigerator Shelf Frame (Glass not included)

Upper Crisper Drawer Frame

Larry from FORT WORTH, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I dropped and cracked the door bin

2 steps; 1. I removed the broken door bin 2. I slid the new door bin in place, Am I a genius or what!

Parts Used:

Door Bin - Clear

Melissa from Huntersville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Support stude for both vegetable crispers broken off

Support studs have an expansion fitting - center post has to be pushed through to allow expansion joint to collapse for removal. After installation, this post can be pushed in or pulled out to secure the stud and be the proper length to hold the bins.

None of this was obvious - an online tip from another member was invaluable.

Parts Used:

Crisper Cover Support - Front

RANDY from NORTH CHARLESTON, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

chrisper drawer jammed found supports were broken

Looked at video on how to remove and reinstall support and followed the instruct ions

Parts Used:

Crisper Cover Support - Front

Crisper Support - Rear

ROMAN from COLTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The top crisper drawer frame was cracked, it secures the glass top also.

Replaced the top crisper drawer frame. Installation was very easy. The hardest part was cleaning all of the spilled food/liquid items from under the drawers once removed to replace the top frame. I will keep the top frame and repair it. From what I have read, this is a very common problem as there is no support in the middle of the frame...it is only plastic.

Parts Used:

Upper Crisper Drawer Frame

Chuck from PHILADELPHIA, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Accidentally dropped a bottle and cracked the bottom bin of our refrigerator.

Once I received the new bin, I removed from the box, then took it out of the plastic wrapping and gently placed on the door of my refrigerator. It was THAT simple. I honestly expected to do more work. I was pleasantly surprised.

Parts Used:

Refrigerator Door Shelf Bin

Monte from CHICAGO, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke the Bin-Door

Replaced said Bin-Door.

Parts Used:

Refrigerator Door Shelf Bin

Joseph from CYPRESS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken door bin

pushed bin into place

Parts Used:

Refrigerator Door Shelf Bin

Nancy from NORTH DIGHTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

WATER FILTER EXPIRED

REPLACED WITH NEW.
HOWEVER, THE WATER FILTER INDICATOR STILL SAYS
'REPLACE'. THERE IS NO LEAKAGE, BUT IT APPEARS LIKE THE NEW CARTRIDGE IS NOT COMPLETELY INSERTED. I'VE TRIED REMOVING AND REPLACING THE NEW CARTRIDGE SEVERAL TIMES, BUT IT STILL SAYS 'REPLACE'.
INCIDENTALLY, THIS WAS THE SECOND ORDER OF THE CARTRIDGE AND LAST TIME I GOT TWO, AND THEY BOTH FIT FINE! WITH THIS ORDER I GOT JUST ONE.

Parts Used: