All Installation Instructions for Frigidaire Refrigerator FGHI1865SP4

crisper glass shattered while cleaning

Insert new glass into slot. Took less than 2 minutes.

Parts Used:

Crisper Glass Shelf Insert

Admirald from North Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

shelf gliders were broken.

This repair was very simple. I removed the old glass shelf and slid the new one in. I then slid the lunchmeat drawer into place. It looks wonderful and the drawer slides nicely in and out.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

Lisa from Broadview Hts, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

crisper glass broke in thausand peaces

it was easy my wife did it wen i went to the fridge it was already installed. thank you!!!!

Parts Used:

Crisper Glass Shelf Insert

Alejandro from Auburn, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Replacement shelf

Removed old shelf and installed new one. Glass is thinner than what came with the fridge. So I rearranged the shelves and use the new shelf for lighter items. I could see the shelf bow in the center under the weight of milk, cool aid and juice.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

Ryan from Sacramento, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Freezer door sagged & didn't seal properly

Installed Metal hinge(old hinge was plastic) to take out sag of door.(painted the hinge color of refrigerator as hinge doesn't have plastic appearance cover )

Parts Used:

Upper Hinge

Hinge Bearing

Gene from Chesaning, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

The crisper glass shelf shatter when trying to clean it.

The repair, if you want to call it that, was a complete no-brainer. The glass slipped right into the shelf. No tools were needed. I was afraid that the glass might break during shipment. However, it was packaged and secured several times over that it was in no danger of breaking during delivery. The part came sooner than I anticipated. I am extremely pleased with this order.

Parts Used:

Crisper Glass Shelf Insert

Leslie from Staten Island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Just wanted to add additional shelf.

Easy. Works fine.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

James from Peoria, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Freezer door sagging due to warped hinge

Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.

Parts Used:

Upper Hinge

Keith from Springfield, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Original glass shelf shattered.

Using Parts Select, followed the menus to identify the correct part. Placed order and the part was a direct swap for the old one. Removed old shelf, insert new shelf and put the drawer in. Job done!

Parts Used:

Refrigerator Shelf (Spill Safe) - White

Thomas from Media, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Ice Maker not getting any water

1). Shut off water supply to fridge. 2). Move fridge out to gain access to back of fridge. 3). Remove poly line to water tube have a glass handy to catch any remaining water that might be in line. Some may have a foam insulating washer around water tube remove it first. 4). My Sears-Kenmore was a twist lock water tube have to turn it to left or right depending on brand to remove tube. 5). After removing make sure tube didn't just have water frozen in tube ( that was my problem ) run it under hot water frozen piece will come out. 5). Problem fixed, reverse directions to re-install tube!

Parts Used: