If your microwave door handle is loose, cracked, or missing, this replacement handle is a great solution. Made from stainless steel and finished in black, it’s designed to fit a variety of models across several trusted brands. It installs easily and helps restore the look and usability of your microwave. Just check your model number to make sure it’s the right match.
This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.
This round glass tray fits select microwaves and measures about 13 1/2 inches across. It holds food and turns during cooking to help heat it more evenly. The tempered glass has grooves underneath that connect with the turntable support or center coupler. Replace the tray if it is cracked, chipped, broken, or no longer turns correctly.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some models of Frigidaire, Electrolux, White Westinghouse, and Tappan models.
This microwave waveguide cover protects key internal components by blocking food particles, grease, and moisture from entering the waveguide area. Located on the interior wall of the microwave, it helps ensure safe and efficient operation. Replacement is recommended if the cover is cracked, burned, or causing sparking, helping prevent further damage and maintain proper performance.
A loose door, repeated clicking, or intermittent operation can indicate a damaged latch body or switch holder. The housing aligns the safety switches with the door hooks and helps prevent operation while the door is open. First inspect the latch opening, door alignment, mounting tabs, and switches to identify every damaged component. Matc...Read moreh the replacement to the microwaves full model number and verify what the assembly includes. Unplugging does not remove the high-voltage capacitor hazard, so professional service is recommended. Do not test the appliance with covers removed or safety interlocks bypassed.
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hector - For model number FFMV162LSA
February 6, 2020
Black handle broke , looking for stainless steel , do you carry this part?
Hi Hector. Sadly there is no SS handle for this model. Thank you for your question and good luck with your repair.
Good afternoon, i have a Frigidaire microwave model ffmv162lsa and just saw the grease filters were missing on it. I'm in an apartment. Lately when i cook and use the fan i still have the smell lingering of what i just cooked. Does the exhaust fan grease filters catch grease and help with the smells? Also, what is the part number i need to order and it looks like there are two grease filters so when i order them do they come in a set of two?
Hello Janice, thank you for your question. Yes, the filters will filter the smell when cooking. They do catch grease and odors from cooking. The filters are PartSelect Number: PS1993472 and are sold individually, and two are required. You may also want to replace the charcoal filter which is PartSelect Number: PS2203386. That filter is sold individually as well and the unit requires only one. I hope this helps.
Thank you for answering so quickly!! i don't see where the charcoal filter is in the unit. can you describe where it is and how to replace it?
Hello Janice, thank you for your question. The charcoal filter is behind the vent above the door. To remove that vent take out the two screws that hold it into place from the top and then slide the vent to the left to release and remove. The charcoal filter should be accessible from there. I hope this helps.
Was this helpful?
Thank you for voting!
Pierre - For model number FFMV162LSA
July 14, 2021
I need the door for my microwave
Hello Pierre, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2582993. Please feel free to contact Customer Service at 1-888-738-4871 from 8:00 AM to 10:00 PM Eastern time, 7 days a week if you need help placing an order. We are looking forward to hearing from you!
How to exchange door handle on frigidaire microwave
Hello Charles, thank you for contacting us. We are providing you with instructions that will help you replace the door handle.
1- Remove the screws holding the front vent.
2- Remove the vent and lift up the door.
3- Use a putty knife to detach the inner door trim.
4- Remove the screws holding the inner door assembly.
5- Remove the inner door assembly and unthread the screws holding the door handle.
The door handle, part number PS2583001, is compatible with your model. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The plastice door handle broke off at the ends on the front of the microwave
144 of 156 peoplefound this instruction helpful.
Tommy from Spring Hill, TN
Easy
15 - 30 mins
Screw drivers
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.
I popped the inside of the door off of the microwave. I then unscrewed the two screws that w
... Read moreere holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.
Read less
Was this helpful?
Thank you for voting!
Microwave handle broke off
37 of 38 peoplefound this instruction helpful.
Nova from Phoenix, AZ
Easy
15 - 30 mins
Screw drivers
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the
... Read more hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!
Read less
Was this helpful?
Thank you for voting!
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
My Orders
