All Installation Instructions for Frigidaire Refrigerator FFHT2126PQ0

door handle broke off

used Phillips screw driver to remove two screws form the top off old handle on top of lower door. slipped new handle on the stud and installed screws in the top of handle .

Parts Used:

Refrigerator Door Handle Set (2 pieces) - Black

Michael from BAY CITY, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator had not been cooling

Discovered the coil was covered with 1/2 inch of ice because defrost cycle had not been working. Replacing the defrost timer and melting ice with hair dryer fixed problem. Hooray!

Parts Used:

Defrost Timer - 120V 60Hz

William from BASKING RIDGE, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door Handle Broke

It was easy to remove the broken handle and install the new on. Only thing needed was a screw driver.

Parts Used:

Refrigerator Handle set (2 pieces) - White

John from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door shelf broke.

Very easily did the repair -- popped the new door shelf right in the place of the old one! No tools needed, no hardware, easy! The part actually measured 24 3/4 but the replacement part said "26 inches" on website & this was THE replacement part. Put this off for so long--ordered part and recd within 2 days, great!

Parts Used:

Refrigerator Door Shelf Bin

Lori from Catskill, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken door shelf bin

Opened the box, snapped it in place. Took longer to just open the box! I carefully inspected the part and compared to the original. I could not tell them apart. The fit and finish is perfect. This is a very well made product. Easy to order, fast shipping, well packaged and very easy to install.

Parts Used:

Refrigerator Door Shelf Bin

Allan from North Miami, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bin had broken.

Replacement was a snap! Literally! OK there were two snaps. One on each side.

Parts Used:

Refrigerator Door Shelf Bin

Ralph from Shelby Twp, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Shelf Held Together with Rubber Bands

Old shelf was removed and the new shelf clicked right into place, an exact match, perfect fit.

Parts Used:

Refrigerator Door Shelf Bin

Leon from Upper Marlboro, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The refrigerator door did not come for the opening swing to be reversed

I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.

Parts Used:

Hinge Bearing

Benjamin from Jersey City, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set

10 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Needed to replace shelf

I can't believe I put if off so long... so easy to do and PartSelect was very fast, efficient, and the cheapest vendor for my part.

Parts Used:

Refrigerator Door Shelf Bin

George from Cleveland Heights, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

both shelfs broke after jar slipped

removed both the shelf retainer and shelf bin, replace with the new units ordered from partselet.com. the whole process from searching, ordering, shipping and installing was very easy... thanks for everything

Parts Used:

Refrigerator Door Shelf Bin

Refrigerator Door Shelf Retainer Bin

christine from carson, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

moved into a new home and the inside freezer was iceing next to the freezer gasket.

purchased a new freezer gasket. It is still iceing in the freezer but now all over the top part and down the back. The new gasket does not secure tight enough around the entire freezer door when it is closed. It is secured properly to the door but does not "grab" tight enough when the freezer door is closed.

Parts Used:

Freezer Door Gasket - Black

Sharon from Montague, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

10 of 25 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

crisper bin had the bottom corner busted, door shelf had cracked

The Pan was a direct swap, as well as the shelf bin. No tools necessary. I'm sure that a repair person would have cost me double what I paid for the same repair.

Parts Used: