FFHS2622MSS Frigidaire Refrigerator - Parts

Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy and easy to install, but please note that the glass shelf is not included and will need to be purchased separately to complete the setup.

This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base connects to your refrigerator and is the part that your two-headed water filter fits into. The main reason you would want to replace it is ...Read moreif you notice a leak when you connect the water filter, or if it is noticeably cracked or damaged. This part is sold individually and is a genuine OEM part.

This refrigerator crisper glass insert is a genuine OEM replacement designed to restore the functionality and organization of your appliance’s lower storage area. Measuring approximately 17.12 inches by 15.40 inches, it fits securely into the crisper pan frame, serving both as a protective cover and an additional shelf for food storage. C...Read moreonstructed from durable glass, it offers a smooth, easy-to-clean surface and helps maintain proper compartmentalization. If the original insert is cracked or broken, replacement is straightforward—simply slide out the damaged glass, transfer the trim if needed, and slide the new insert into place. Sold individually and compatible with select refrigerator models; verify fit before purchase.

This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for re...Read moreplacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.

Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.

The light socket on your refrigerator houses the light bulb and connects it to the power source. If you notice that your refrigerator light does not come on when you open the door, you may need to replace the light socket. This light socket is made of white plastic with two metal prongs. The light socket is located inside the refrigerator...Read more. Many of our customers have rated this repair as easy. To complete this repair, simply pop the old socket out with a small flat blade screwdriver and disconnect the wires. Then simply reconnect the wires to the new socket, and snap it in place with the locking tab.

This temperature sensor, also known as a thermistor, is responsible for preventing the evaporator within your refrigerator from overheating during its defrosting cycle. This sensor is compatible with various makes and models of refrigerator and is sold as an individual part. This sensor works with the electronic control board within your ...Read morerefrigerator to control the temperature by turning the compressor on or off. If your fridge is too warm or too cold, consider changing the thermistor with this genuine OEM part, and make sure to disconnect the power to the refrigerator before doing any repairs.

This middle crisper drawer frame provides sturdy support for the crisper drawer cover while helping keep your refrigerator organized and functioning properly. Constructed from durable, wear-resistant ABS plastic, it supports the glass shelf insert and includes integrated slide rails that allow the crisper drawer to open and close smoothly...Read more. Measuring approximately 16-3/4 inches wide by 19-5/8 inches deep, this frame is designed to replace a cracked, damaged, or worn original component and restore proper support within the fresh food compartment. Installation is straightforward and typically involves removing the crisper drawer and glass shelf insert, transferring the glass insert to the new frame if applicable, and reinstalling the assembly. Please note that the glass shelf insert is sold separately and is not included with this frame.

This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.

This dispenser crusher housing, also known as a refrigerator ice crusher housing, is a genuine replacement part compatible with various refrigerator models. It functions as a protective cover for the ice crushing blades located within the ice container. To complete this repair, you’ll need a Phillips screwdriver, a flat-blade screwdriver,...Read more a 1/4-inch nut driver, and a pair of channel lock pliers. Wearing work gloves is recommended for safety. Please note that the replacement part may differ in appearance or color from the original, but it is designed to fit and function exactly the same.

If your fridge isn’t cooling evenly or feels warm in spots, this blower motor might be the fix. It’s the part that keeps air moving through the fresh food section, helping everything stay cold. This one has a 3-wire connector and fits select models. Just make sure to unplug your fridge before installing, and check that it’s the right match for your appliance.