- Home
- FFFH20F2QWB
- Instructions
FFFH20F2QWB Frigidaire Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Just lost key
2 of 4 people
found this instruction helpful.
-
Toni from Little Rock, AR
- Really Easy
- Less than 15 mins
No repair. The key fit!
Was this helpful?
Thank you for voting!
none
1 of 2 people
found this instruction helpful.
-
Larry from RANDOLPH, MN
- Very Easy
- Less than 15 mins
point and shoot install.
Was this helpful?
Thank you for voting!
Lost Key
1 of 2 people
found this instruction helpful.
-
Kelli from Goosecreek, SC
- Really Easy
- Less than 15 mins
It's easy to know how to use a key. I didn't have a difficult part, I didn't have the model # because I had lost my key and the model # is inside. I was able to find the energy saving paper that came with it but it had four model #'s. I called a couple places and no could me. I pulled up Part Select on line and just thought I would giv
... Read more
e them a try. I got a very nice person (Jeremy) He went thru every model that I had and three out of the four matched so he sent me a key and if it didn't work I could get my money back. I give him a A+ four taking that extra step, unlike the other places. Very satisfied!
Read less
Was this helpful?
Thank you for voting!
Lost original key
1 of 2 people
found this instruction helpful.
-
katrina from EAST ORANGE, NJ
- Very Easy
- Less than 15 mins
Brought replacement key works just like original I thought it would be metal from reviews but it was plastic and still works perfectly
Was this helpful?
Thank you for voting!
Could Not Lock
2 of 6 people
found this instruction helpful.
-
brenda from snellville, GA
- Really Easy
- Less than 15 mins
Oh yea thanx to partselect it went great didnt get fisrtkey but when got the second key it worked great thanx partselect
Was this helpful?
Thank you for voting!
Evaporator freezing up. Noticed Ice cream not frozen solid
0 of 1 people
found this instruction helpful.
-
Paul from Buffalo, MN
- Really Easy
- 30 - 60 mins
-
Screw drivers
Notice ice build up on the panel in front of the evaporator coil. Unplugged freezer and removed evaporator panel. Plugged unit back in and checked fan, coil "snap switch" and heater element, all seemed to check out good. Found defrost timer stuck in the freeze position, causing frost to accumulate over the evaporator. Manually rotated
... Read more
defrost timer to the 30min defrost cycle and system went into defrost. Ordered defrost timer and installed (part arrived in 3 days). Freezer works great again. Too bad I ended up throwing 400 dollars worth of meat away. the fix was very simple. Will definitely use PartSelect again. Thank you.
Read less
Was this helpful?
Thank you for voting!
No problems
2 of 9 people
found this instruction helpful.
-
Nancy from LEHIGH ACRES, FL
- Really Easy
- 15 - 30 mins
-
Wrench (Adjustable)
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Was this helpful?
Thank you for voting!
Coils not Defrosting and stopped freezing
-
Joseph from Yulee, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Upluged power pulled freezer out from wall removed the two screws that holds the defrost timer unpluged defrost timer pluged new timer in mounted new timer back with the two screws pluged freezer back in and job was complete. Freezer working fine.
Was this helpful?
Thank you for voting!
lost key
-
Stephen from noble, OK
- Really Easy
- Less than 15 mins
Ordered freezer key friday afternoon received it saturday afternoon. Fast service
Was this helpful?
Thank you for voting!
freezer did not run at all
-
HUGO from GILBERTSVILLE, KY
- Really Easy
- Less than 15 mins
-
Screw drivers
i order the defrost timer and the temperaturecontrol as was advised,it was very simple as reading the previous notes, pulled knob off, rerout temp metal probe, while the cover was off i clean it as much as i could and repainted the bottom with applince paint, looks good as new, very easy, whent to the defrost timer was so simple unscreewb
... Read more
racket, pull wire clip harness replace harness rescreew bracket, replug freezer it's good as new, saved a lot of money, i love this web site
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Needed a freezer key
-
Nancy from Star Lake, NY
- Really Easy
- Less than 15 mins
We really didn t need to do a repair, we just ordered a freezer key that we didn t have. I must say the shipping was fast we received it the next day. It was worth the shipping charge. We will be ordering again. Great service.
Was this helpful?
Thank you for voting!
freezer door got locked and we couldn't find the key
-
Linda from Fresno, CA
- Really Easy
- Less than 15 mins
inserted key and turned
Was this helpful?
Thank you for voting!
condenser fan stop working
-
George from Gilroy, CA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
Replaced fan. I ordered the fan and received it the following.(-:
Was this helpful?
Thank you for voting!
Fan would not start occasionally
-
Mike from Satellite Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
I unscrewed the screws that held the old fan on, disconnected the wiring harness and removed the old fan. I pulled the blades off the motor and put it on the new fan. One thing of note, the screw holes on the new fan weren't threaded. I assume this is by design, so I used the screws to thread the holes before installing it in the freezer
... Read more
. Once I did this, the rest of the installation was easy, just screw it back in and connect the wiring harness.
Read less
Was this helpful?
Thank you for voting!
Noisy fan
-
CRAIG from PRESCOTT VALLEY, AZ
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.
Was this helpful?
Thank you for voting!