FES355EBE Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner was not heating properly
-
Marilyn from Dasssel, MN
- Really Easy
- Less than 15 mins
I ordered the element. When it arrived, I simply removed the old one and put in the new one. However, it did not completely solve the problem. The heat is now distributed evenly, but still have to turn the burner to 7.5 to boil water.
Was this helpful?
Thank you for voting!
stove top element burned out & drip pans needed replacing
-
genese from brantely, AL
- Really Easy
- Less than 15 mins
was very easy to replace the element, just pulled the old element out and eased the replacement in. was happy to find partselect.com to order what i needed. the order was filled correctly & delivered in a few day. it was good to be able to review how other problems could be solved & what parts to order
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced burner block
-
Glenn from Fossil, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
Looked at the instructions and cut the wires, put the new wires in the block, attached the block to the range, put the new wires to the range wires using the wire nuts. I plugged the element into the block turned on the power, tried the element and it worked. It was really a easy repair.
Was this helpful?
Thank you for voting!
heating element didn't work
-
Judith from Sidney, NY
- Really Easy
- Less than 15 mins
I did the repair in less then 5 minutes. I took out old element and put in new one and turned it on and I had heat. Works great Thanks the part came in 2 days what a wonderful suprise that was.
Was this helpful?
Thank you for voting!
Needed new drip bowls
-
Judith from Jewell, IA
- Really Easy
- Less than 15 mins
The hardest part of the job was cleaning under the old rings. Cook top looks new again!
Other Parts Used:
Was this helpful?
Thank you for voting!
Could not find drip plates in local stores
-
Pat from Hendersonville, NC
- Really Easy
- Less than 15 mins
Just put the drip plates in stovetop and worked perfectly
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced burner drip bowl
-
Irene from Rochester, NY
- Really Easy
- Less than 15 mins
Very easy to remove the old drip bowl and replace with new ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Oven was not heating up to the set temperature. Stopped around 180-200F.
-
Robert from Glasgow, MT
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed 2 screws holding old temperature sensor inside the oven and gently pulled out the wire till the connector came through the hole. Disconnected old probe and attached new one. Fished the wire back in the hole and replaced the two screws. Then followed the operating instructions for calibrating the oven. Ended up setting it +5 deg
... Read more
rees. So far, works great.
Read less
Was this helpful?
Thank you for voting!
Stove door switch was broken
-
James from Milford, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
used two flat bladed screw drivers to get under edge of switch.. pried one side up and unit popped loose... removed electric connection (three prong recep) and plugged in new switch ..pushed into hole and was done... approximately 3 minutes..
Was this helpful?
Thank you for voting!
Drip Bowl Replacement
-
Jennifer from Arena, WI
- Really Easy
- Less than 15 mins
I could not find the larger size universal drip bowl to fit the 8" burners on my stove. This product replacement is perfect.
Was this helpful?
Thank you for voting!
Couldn't find drip pans that fit
-
Heather from Springfield, TN
- Really Easy
- Less than 15 mins
I went to all of the do-it yourself stores and spent a bunch of money on aftermarket drip pans only to find out that none of them fit. I came up on your website and also called customer service. The found the right part and mailed it too me. They fit perfectly. No more burnt and rusty drip pans. I know where to go for parts now.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace ill-fitting drip pans
-
thomas from cleves, OH
- Really Easy
- Less than 15 mins
After two failed attempts to get the 'correct' drip pans for my range from two other supply outlets, Part Select had the proper drip pans for this model. They fit perfectly! Simple installation and threw away those cheap, poorly fitting replacement pans I've put up with for three years! Thanks Part Select for having the correct parts!!
Other Parts Used:
Was this helpful?
Thank you for voting!
Rusted out drip bowls
-
Shelley from Chillicothe, MO
- Really Easy
- Less than 15 mins
The parts came quickly. I removed old drip pans and snapped the new ones into place. A child could do this. Now my cooktop looks new and I am not ashamed for anyone to see it.
Other Parts Used:
Was this helpful?
Thank you for voting!
8" left front surface element would no longer heat properly
-
Robert from Greencastle, PA
- Really Easy
- Less than 15 mins
I ordered the exact replacement element, and after unpacking it, it took about 5 minutes (actually,less; didn't time it), and the new element was installed and working fine.Thank you very much.
Was this helpful?
Thank you for voting!
drip bowls on stove rusty
-
Kenneth from Osseo, WI
- Really Easy
- Less than 15 mins
they were for my 90 year old mom. she dropped them in by herself, perfect fit....thanks very much
Other Parts Used:
Was this helpful?
Thank you for voting!