FBC6025 (Type 0) DeVilbiss Compressor - Parts

NIPPLE 1/4-18 NPT X

NUT .563-18 UNF HEX This is an authentic replacement part that has been OEM sourced to be used with Porter Cable, DeVilbiss, and Black and Decker air compressors. The metal nut is commonly used to connect the outlet tube... Add to cart

ORING 2.759/2.719ID O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes f... Add to cart

ASSY NUT SLEEVE 3/8 This is a genuine replacement part manufactured for use with air compressors from DeWalt. This part creates an airtight seal between the elbow and the tube. You may need a wrench to replace this part... Add to cart

ASSY NUT SLEEVE 1/4 It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a ... Add to cart

BOLT .375-16X2.25 UN This is an authentic replacement part, sourced from the original manufacturer for use with generators and air compressors. The shoulder bolt is used with several different types of equipment and the a...

WHEEL 9 BLACK SEMI-P

REGULATOR 4PORT P1P2 This is a genuine OEM part that is intended to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The regulator is used to adjust the level of pressure in the tank. This it...

SCREW .250-20X.750 U It is a genuine manufacturer-sourced replacement screw which is specially designed for use with air compressors. This is a standard hardware which has multiple applications depending on the model of y...

SCREW .250-20X1.25 U This is an authentic replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The metal screw is used to ...

Fan Blade This fan is an OEM direct from Craftsman for air compressors. This part cools the air compressor and connects to end of the motor shaft to prevent the air compressor from overheating. You will need a ...

Adapter