EN420MP Makita Trimmer - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hex. Socket Head Bolt M5X25
Part #922241-7
Ball Bearing
Part #211097-6
Retaining Ring S-10
Part #961006-2
Retaining Ring S-7
Part #961003-8
Hex. Socket Head Bolt M4x16
Part #922126-7
This is an original Makita replacement part. The bolt is commonly found in power tools such as jig saws and rotary hammers. This part is made of metal, and may be used in different locations in the machine, depending on model. Please be aware that there are different bolts used in the machine. Refer to the parts diagram to be sure of ...Read moreordering the correct part. You will require an Allen or hex wrench when replacing this part. This item is sold individually.
Read less
Hex. Socket Head Bolt M4x25
Part #922146-1
This is a genuine replacement part sourced from the original manufacturer to be used with Makita power tools. The hex socket head bolt is used with a variety of different types of tools such as jigsaws, table saws, electric screwdrivers, and cordless ratchets. The application of the bolt can vary based on the model the power tool, and it is sold individually.
Flat Washer 6
Part #941151-9
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutters. The washer has multiple applications based on the model of the power tool. It is recommended to review your model's diagram to verify this washer's compatibility. The washer is sold individually.
Retaining Ring S-8
Part #961004-6
The retaining ring fits next to the helical gear. This is a genuine Makita part sourced directly from the manufacturer for use in saws. This part is priced individually and is made of metal. A screwdriver and a set of snap ring pliers might be required during the replacement of this part. It will require replacing if it becomes broken.
Stop Ring E-4
Part #961011-9
This is an authentic Makita replacement part manufactured for use with power tools. The stop ring is commonly used to secure a part assembly to a shaft or spindle. The stop ring is a versatile part used with several different power tools. This stop ring is sold as an individual replacement part, please see model diagram for part location and usage.
Retaining Ring R-26
Part #962105-3
This is a genuine replacement part sourced directly from the manufacturer. The retaining ring is commonly found in power tools from Makita, such as demolition hammers, grinders, and drivers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different ret...Read moreaining rings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require pliers and a wrench or screwdriver when replacing this product. This item is sold as an individual replacement part.
Read less
Tapping Screw
Part #265995-6
Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.
Ball Bearing
Part #211031-6
Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls re...Read moreduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Read less