My Orders
- Home
- EI32AR80QSC
- Instructions
EI32AR80QSC Electrolux Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan would not start occasionally
-
Mike from Satellite Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
I unscrewed the screws that held the old fan on, disconnected the wiring harness and removed the old fan. I pulled the blades off the motor and put it on the new fan. One thing of note, the screw holes on the new fan weren't threaded. I assume this is by design, so I used the screws to thread the holes before installing it in the freezer
... Read more
. Once I did this, the rest of the installation was easy, just screw it back in and connect the wiring harness.
Read less
Was this helpful?
Thank you for voting!
Noisy fan
-
CRAIG from PRESCOTT VALLEY, AZ
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Remove the cover panel inside the freezer, remove and replace the fan motor (pull fan blades off old motor and push on the new one) and replace the cover.
Was this helpful?
Thank you for voting!