DWS780 DeWALT - Parts

This is a guard link designed for various saw models. Its function is to lift the guard blade as the saw blade is lowered, ensuring safe cutting without obstructions. The guard link is constructed from high-quality black metal and is available as an individual part, excluding any accompanying hardware or components. Guard links may experi...Read moreence wear or bending at each connection point, affecting the saw blade and the main saw body connection. Such wear or bends can disrupt the cutting process, making it less efficient and smooth. If you observe such wear or bends, it is crucial to promptly replace the guard link to maintain smooth operation of your saw. To replace the guard link, start by disconnecting your saw from its power source. Locate the guard link and remove the screws securing it to the saw body. Once these screws are removed, replace the old guard link with the new one and secure it using the same screws.

This authentic item is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. The armature assembly attaches to the field & case. When replacing this part a screwdriver, a socket set, and a set of pliers may be needed. It is made of metal and will require replacing if it stops working. This part is available as an individual replacement part.

This is a genuine component which is supplied directly from the original equipment manufacturer for use with DeWALT compound miter saws. It is an identical replacement for a missing or a faulty shoulder screw that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and ...Read moreapplication of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. ...Read moreThis reduces wear on the tool, allowing it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Authentic Manufacturer Approved replacement part designed for some Compound Miter Saws. The purpose of this part is to lock the saw arm in the down position. This item is made out of Metal and it is Sold Individually.

This is an authentic manufacturer sourced brush ring assembly. It is specially made for use on Dewalt saws. This part holds carbon brushes around the armature to provide a safe contact. This assembly consists of a plastic holder ring, two (2) metal brush holders with springs and two (2) carbon brushes with lead wires attached. To replace this assembly you will need a screwdriver.

This is an authentic DeWALT replacement part. The bearing plate is designed by the manufacturer for use in miter saws. This part is made of metal, and is placed between the gears and the bearings in the gear case assembly. You will require a screwdriver when replacing this part. This item is sold individually.

An authentic manufacturer sourced replacement part that is specially produced for use with Dewalt miter saws. This is the gasket that is used to create a seal for the gear case assembly. Over time gaskets may get compressed and begin to crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for DeWALT table saws. This is an identical replacement for a missing or a damaged field case that was installed on a new unit. Make sure to refer to the appropriate diagrams for your model for the correct location and application of this component. Keep in mind ...Read morethis high-quality filed case is made of durable plastic and is sold individually. Note, the hardware to secure it is sold separately.

This replacement field is specially designed for Dewalt miter saws. It is a genuine part that is sourced directly from original equipment manufacturer. In conjunction with an armature it is this is the main component of an electric motor. A field is generally would get damaged by overloading the power tool or due to a faulty armature. It ...Read moreis advised to replace carbon brushes when replacing a field. Please note, this metal item is sold individually. To complete this repair you should need a screwdriver. • Make sure the saw is unplugged • Remove brush covers and take out brushes • Remove the cap and the housing screws • Once the housing is removed you will have access to the field • Disconnect all wires leading from the field • Take out old field and replace it with a new one • Re-connect all the wires • Re-assemble the motor

This item has been sourced from the original manufacturer to ensure a high level of quality. The identification label is intended to be used with miter saws from DeWalt. The adhesive label attaches to the motor case endcap. Replacing the label is a good way to improve the look of a used or refurbished miter saw. This item is sold as an individual replacement.

This is an authentic DeWalt replacement part sourced from the original manufacturer for use with miter saws. The metal wrench holder is commonly used to store the blade wrench onboard of the miter saw. This wrench holder is available as an individual replacement part, please see model diagram for associative parts.