DW628 (Type 1) DeWALT Router - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ball Bearing
Part #330003-16
O Ring
Part #96122-00
O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: rn • Extrusion and Nibbling...Read moreu> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. rn • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. rn • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. rn • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.rn • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
Read less
Ring
Part #58835-00
Washer
Part #000418-00
Cord Clamp
Part #003618-00
This is an original DeWALT replacement part. The cord clamp is designed by the manufacturer for use in power tools such as drills, circular saws, and rotary hammers. This part is made of metal, and is used to help secure the power cord in the machine housing. You will require a screwdriver when replacing this item. This product is sold individually.
Screw
Part #99237-01
Washer,Spring
Part #34144-00
Screw
Part #33874-00
Screw
Part #368-00
Screw
Part #373-00
Nut,Hex
Part #52581-00
Wrench
Part #448623-00