DW294-B2 (Type 1) DeWALT Wrench - Parts

This is an authentic replacement part manufactured for use with impact wrenches. The gear and pinion is used to drive the cam and gear, that spins the impactor and anvil. The pinion is in direct drive with the armature. The gear and pinion are one unit, and it is sold individually.

This is a genuine component which is sourced from the original manufacturer for use with DeWALT, Black and Decker and Porter Cable power tools. The special terminal is commonly used to link the wire from the cord to the switch. It provides an identical replacement for a missing or a faulty part that was installed on a new unit, please che...Read moreck the diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality terminal is made of durable metal and is sold individually.

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below. It is held in the anvil by use of a spring and pin.

It is an authentic item that is supplied by original equipment manufacturer for use with Dewalt, Porter Cable and Black and Decker power tools. This replacement spring helps to provide tension for the carbon brush pushing it against the armature. Over time the spring may lose its tension or even break eventually requiring replacement. It is made of durable metal and it is sold individually.

The rubber cup goes next to the brush spring. It is a genuine item that is supplied by the original equipment manufacturer for use with drills, grinders, jointers, polishers, routers, sanders, and saws made by DeWALT, Black & Decker, and Porter Cable. This is made out of rubber and is sold individually. It might require an allen wrench to replace this part if it becomes broken.

It is a high-quality OEM part that is specially made for Porter Cable, Black and Decker and DeWALT power tools. The receptacle is designed to safely secure and connect a wire. It is an identical replacement for a faulty or a missing part that was installed on a new unit. To ensure the correct application, refer to the appropriate diagrams...Read more of your model. Note, this high-quality receptacle is made of durable metal and is sold individually. You will need a screwdriver to take the housing apart when replacing this component.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. Cord guards, also called cord protectors, are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. It is made out of rubber and it is sold individually.

Replace worn or missing hardware with this genuine manufacturer-sourced metal ball. Designed specifically for use with select DeWALT, Porter-Cable, and Black & Decker power tools, this high-quality component offers a precise fit and reliable performance. It serves as a direct replacement for the original part installed on new units, helpi...Read moreng to restore proper function and extend the life of your tool. Made from durable metal, this part is built to withstand heavy use and is sold individually. For correct placement and compatibility, please refer to your tool’s model diagram before installation.

Genuine OEM replacement part, this item is sold individually. This spring is used in various locations of the tools listed below. Over time springs will loose their tension and will need to be replaced. The dimensions on this spring are 5/16 in length and 3/16 in diameter.

This authentic manufacturer-sourced part is made for DeWALT and Black and Decker drills and impact wrenches. It is a special pin that helps to secure the switch. The pin provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model...Read more for the correct location and application of this part. Keep in mind this high-quality pin is made of durable metal and is sold individually.

Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 605511-00