- Home
- DV42H5000EW
- Instructions
DV42H5000EW Samsung Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The drum wrapper on our dryer was coming apart in the back, causing the metal drum to tear apart and causing the drum to not roll properly.
2 of 3 people
found this instruction helpful.
-
Brendan from CASPER, WY
- Easy
- 1- 2 hours
-
Screw drivers
I had to take the whole thing apart to replace the drum wrapper. I followed this very helpful YouTube video for the step-by-step instructions on disassembly.
https://www.youtube.com/watch?v=9ul2BIvVEVU&t=428s
Once the new drum was installed, I followed the steps in reverse to put everything back together.
https://www.youtube.com/watch?v=9ul2BIvVEVU&t=428s
Once the new drum was installed, I followed the steps in reverse to put everything back together.
Was this helpful?
Thank you for voting!
Original belt broke after nylon tension pulley bearing froze.
2 of 4 people
found this instruction helpful.
-
John m from GRAPEVIEW, WA
- Really Easy
- 30 - 60 mins
Thank you
partselect.com for a much better heavy duty belt than the original. Way over priced, but well worth it. After watching the video & following it step-by-step, I now have a perfectly running dryer. P.S. don't forget to plug back in the (3) wire harnesses. The entire experience was a great feeling of accomplishment. Thank ... Read more s again partselect.com
partselect.com for a much better heavy duty belt than the original. Way over priced, but well worth it. After watching the video & following it step-by-step, I now have a perfectly running dryer. P.S. don't forget to plug back in the (3) wire harnesses. The entire experience was a great feeling of accomplishment. Thank ... Read more s again partselect.com
Read less
Was this helpful?
Thank you for voting!
making a clunky noise, taking longer to dry
1 person
found this instruction helpful.
-
Jesse from FULLERTON, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers
removed the top cover, remove control panel,remove door, remove belt assy, and pull out old drum and installed new drum. Used only a phillips screw driver and took approx. 30 min. Dryer is quit and drying better.
Was this helpful?
Thank you for voting!
Dryer would not spin
1 person
found this instruction helpful.
-
John from EARLYSVILLE, VA
- A Bit Difficult
- More than 2 hours
-
Screw drivers
The design of my dryer is a bit different from the video on PartSelect - but it is very close. And if you watch the really good video on PartSelect plus a few others on Youtube you can figure out how Samsung in general designs the different components. You can fix this yourself definitely.
Cost of part to fix - about $50.
... Read more />Repairman - didn't even ask. Would probably be $300-400.
Cost of replacement $1,000.
I rated the repair "A bit difficult" only because this is the first time I have ever repaired an appliance. If I were to repair this one again, I'd rate it as Easy.
I'm really thankful for the PartSelect video. This makes DIY repairs possible.
Thanks.
Cost of part to fix - about $50.
... Read more />Repairman - didn't even ask. Would probably be $300-400.
Cost of replacement $1,000.
I rated the repair "A bit difficult" only because this is the first time I have ever repaired an appliance. If I were to repair this one again, I'd rate it as Easy.
I'm really thankful for the PartSelect video. This makes DIY repairs possible.
Thanks.
Read less
Was this helpful?
Thank you for voting!
noise when drying
3 of 8 people
found this instruction helpful.
-
jose from MISSOURI CITY, TX
- Really Easy
- 30 - 60 mins
-
Screw drivers
replace Drum support roller & axel and belt
Was this helpful?
Thank you for voting!
dryer leveling legs were missing
1 of 2 people
found this instruction helpful.
-
Jordan, from NIOTA, TN
- Easy
- Less than 15 mins
We unstacked our washer and dryer and needed dryer feet again.
Was this helpful?
Thank you for voting!
high limit thermostat and heating element were bad.
1 of 2 people
found this instruction helpful.
-
Paul from FIRESTONE, CO
- Easy
- 1- 2 hours
-
Screw drivers, Socket set
I would like to direct the attention to PartSelect instead of my repair. They were awesome in helping me to get my parts. I had called, a few minutes after the deadline for overnight shipping, the gentleman helping me, pushed the order through and I got my parts the next day, allowing me to repair my dryer. I have ordered several parts
... Read more
, for several different appliances, (all Samsung) and PartSelect has always come through for me. Excellent Customer Service!!
P.S. Don't buy Samsung appliances unless you want to get good at repairing them!
P.S. Don't buy Samsung appliances unless you want to get good at repairing them!
Read less
Was this helpful?
Thank you for voting!
Drier did not turn it was not the belt
1 of 3 people
found this instruction helpful.
-
Anthony from FLORAL PARK, NY
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I still had to take it apart there was a small sock stuck in the fan that blowes the lent out my wife left the lent filter out one time. Your video was a great help. I'm a mechanic and it was easy thanks Anthony Ratto [email protected]
Was this helpful?
Thank you for voting!
The dryer shut itself off and displayed error code TO
1 of 4 people
found this instruction helpful.
-
Leslie from Frederick, MD
- Easy
- 30 - 60 mins
-
Screw drivers
Took off the back of the dryer and replaced the thermistor. A $7 part that would have been a couple hundred dollars if we had to call a repairman.
Was this helpful?
Thank you for voting!
Hooking up belt and pully
1 of 4 people
found this instruction helpful.
-
Corrado from YONKERS, NY
- Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Followed video and YouTube most was easy.... put the hooking up the belt took time
Other Parts Used:
Was this helpful?
Thank you for voting!