DSE25JGHKCWW General Electric Refrigerator - Parts

Dispenser Door Solenoid Assembly This part is a possible option when ice door won't open or shut properly or when water is not dispensing. Add to cart

Dispenser Door Assembly or Flapper

★★★★★

★★★★★

(1)

This part mounts in the ice dispenser. The crank no longer comes with this part but you can use original crank. The crank is sold separately depending on the model number of your appliance. Add to cart

Evaporator Fan Grommet - Grey This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unu... Add to cart

Defrost Heater and Bracket Assembly The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils. Add to cart

Door Handle Fastener

★★★★★

★★★★★

(1)

This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal. Add to cart

Light Switch This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly f...

Shelf Support This plastic shelf support, or shelf stud connects the shelf to your refrigerator. To replace the shelf support first remove the shelves and drawers from your refrigerator, then remove the damaged or ... Add to cart

DC Condenser Fan Motor - 12V This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan. Add to cart

Lid Bumper The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down o... Add to cart

Screw 12-24 TT HX 7/8 S

★★★★★

★★★★★

(1)

This is a 12-24 TT HX 7/8 S refrigerator or freezer screw. It is a little over 1 inch in total length. This is sourced directly from the original manufacturer. Add to cart

Run Capacitor This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...

EVAPORATOR FAN BLADE This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. I...