DLGX4001B (ABLEEUS) LG Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The lint dryer filter was not fitting in correctly so it sticks out a bit and while clothes are drying it was catching it and ripping/twisting and damaging all my clothes
I bought the whole dryer filter kit, but turns out I only needed the dryer filter and am very happy about that. No tools necessary I just slid it right in. It fit perfectly and I no longer have anxiety about my clothes coming out ripped.
Parts Used:
-
Luciana from PRT WASHINGTN, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
31 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Former lint trap would catch clothes in dryer and rope them together
-
Brian from LOCKPORT, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
13 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter and cover guide melted which was ripping up some clothes
Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done.
Parts Used:
-
Kevin from FARMINGVILLE, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
15 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken filter and holder
I didn't get to do the repair because despite the model number and the picture being exactly what I needed I was shipped the wrong part and basically told by pets select to shake it off that's your problem not ours.
Parts Used:
-
Darryl from GOODYEAR, AZ
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
12 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original lint housing has damage that causes clothes to get caught and tear up
Able to complete install but the lint housing does not allow the lint screen to slide down completely due to the housing lacking the appropriate cut outs/notches. The slit becomes too narrow for the lint screen so it protrudes from the sides. The delivered product does not match the image on the item description, which shows the proper cut outs/notches that should fully accommodate the lint screen.
I'm having a similar experience with this reviewer:
John S - February 14, 2022
Verified Purchase
Lint screen housing
The housing will not allow the lint screen to set completely down because the housing lacks the proper cut outs causing the lint screen to set 1-1.5 inches too high. I was able to cut out the required notches in the plastic so that the lint screen would fit. The picture shows the proper notches but the delivered product didn’t have the notches and does not match the picture.
Will return the item and keep searching for the correct lint housing.
I'm having a similar experience with this reviewer:
John S - February 14, 2022
Verified Purchase
Lint screen housing
The housing will not allow the lint screen to set completely down because the housing lacks the proper cut outs causing the lint screen to set 1-1.5 inches too high. I was able to cut out the required notches in the plastic so that the lint screen would fit. The picture shows the proper notches but the delivered product didn’t have the notches and does not match the picture.
Will return the item and keep searching for the correct lint housing.
Parts Used:
-
Justin from VANCOUVER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lint screen had a broken edge
The lint screen that this company sent was 3x too large. I called to return/exchange it. No one available - go to customer service.
I went to customer service and entered my email address and the order number (while I was looking at the original order1). The email and order number could not be found.
I am still waiting to hear from someone from the company to get a RMA and return label! Will NEVER use this company again.
Vivien Joebchen
I went to customer service and entered my email address and the order number (while I was looking at the original order1). The email and order number could not be found.
I am still waiting to hear from someone from the company to get a RMA and return label! Will NEVER use this company again.
Vivien Joebchen
Parts Used:
-
Vivien from CARLSBAD, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Manufacturer has redesigned the filter and housing, so you have to get the updated parts in a set.
This has taken days to get the updated parts from another major international supplier. You can't just buy the screen or the housing - you have to get an updated set. Unfortunately they were not immediately available from PartSelect.
Parts Used:
-
David from ALEXANDRIA, VA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer's lint filter was cracked.
I put the dryer information into my browser and found PartSelect had the exact replacement part I needed. I ordered the part and it came is just a few days. I removed the part from the excellent packaging, removed the cracked lint filter from the dryer, replaced it with the new lint filter and done!
Among things I've successfully repaired, this was the easiest and best job I've ever done. Quick, Easy and painless.
Thanks for asking!
Among things I've successfully repaired, this was the easiest and best job I've ever done. Quick, Easy and painless.
Thanks for asking!
Parts Used:
-
David E from SAN ANTONIO, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
When manufacturer confirmed the part would fit without an adapter, it was the easiest DIY task ever undertaken.
Parts Used:
-
Ernest J from Columbia, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The mesh was ripping away from the frame on the dryer filter
Ordered a new one and installed it in a matter of seconds.
Not difficult!
Not difficult!
Parts Used:
-
Carla from CHARLOTTE, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked lint filter
-
Richard from MADISON, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
a piece of plastic broke by the lint trap
-
Jason from Davenport, IA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
One corner of th elint filter kept sticking up and catching clothes on it.
R&R new lint filter.Old filter appears to have been made improperly and the out frame was warped raising the cormer that kept catching the clothes.
Parts Used:
-
Paul from Grosse Pointe Farms, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!