1. Home
  2. DLGX3651V
  3. Instructions

DLGX3651V (ASSEEUS) LG Dryer - Instructions

All Instructions for the DLGX3651V
91 - 96 of 96

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heard a thumping sound when running
  • Ernest from Arcanum, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Wrench set
Unplugged the dryer from the wall. Removed the back bracket holding the top on. Then the top will slide back and lift off. Next I removed the screws holding the control panel. Removed the door. Removed all the screws holding the front cover on. Removed the lent shoot. Manually rotated the tumbler. Checked both rollers in the front. Foun d one with the flat spot in it. Removed and replaced it.
Read less
Was this helpful?
Thank you for voting!
I broke the igniter while adapting from Natural gas to LPG
  • Nathan from Mount Vernon, WA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Wrench set
This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks.
Was this helpful?
Thank you for voting!
Drum in Dryer had cracked at front causing a thump as it rotated
  • Carol from Noblesville, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers
First the delivery time was incredible, I ordered the part at 2pm on Mnday and recieved the drum Tuesday afternoon. I'm not sure how this was accomplished as I can't even mail a letter across town and receive the next day. Reoved front of dryer removed old drum and slid in new drum. only difficulty was the wiring disconnect on the cont rol board, didn't want to come off. took 5 minutes to work loose.
Read less
Was this helpful?
Thank you for voting!
Shutting off a while after starting. Burning smell.
  • Dennisd from Waco, TX
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Seemed to be shutting off on the safety thermostat so I replaced them all. Works.
Was this helpful?
Thank you for voting!
Hole in drum
  • David from Boise, ID
  • Very Difficult
  • 1- 2 hours
  • Screw drivers
Found YouTube video followed it closely and did extensive cleaning. The lint on the felt of the drum was causing a rough rotation as well.
Was this helpful?
Thank you for voting!
Not heating correctly
  • Inland Commercial Appliance from Moreno Valley, CA
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
Removed Top, then front and drum. Parts easy to access once drum is out. Recommend reading up on drum replacement. Would appear that all repairs will require taking it out.
Was this helpful?
Thank you for voting!
All Instructions for the DLGX3651V
91 - 96 of 96