The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter...
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your cur...
This motor works with the belt to drive your dryer's drum.
$476.35
In Stock
Questions And Answers for DLE7100W
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jamie
July 13, 2021
This dryer is about 15 or 16mths old. The dry light is flashing on and off. The dryer won't heat up. It will run for just few minutes then shut off. What could be wrong? And is this a part i can replace myself?
For model number DLE7100W
Hi Jamie,
Thank you for your question. If your dryer is shutting off too soon, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermistor and the blower thermostat. These are parts that you should be able to replace yourself. There is a video listed with the thermistor on our website that you may reference on how to install it and here is a link to a video from our YouTube Channel that you may reference on how to install the blower thermostat, https://www.youtube.com/watch?v=lfPaS9K_yMQ. The dryers and the parts in our videos may not appear like the ones you have, but they will give you a general idea on how to install them. We hope this helps! Good luck with the repair!
Purchased as a LG DLE7100W used dryer. Changed it from a 4 to a 3 prong plug but did not swap the extra neutral wire to the ground connection. Basically, I ran the dryer without a proper ground connection. I tested it on Normal cycle but the timer would elapse down to 1 minute al.ost immediately. The only setting that would keep running was Timed Dry, so I ran it on Timed Dry for 1 50 minute cycle but now the dryer display turns on and the minutes elapse however the dryer itself does not turn or heat up no matter what cycle you select. What could be the effected parts?
For model number DLE7100W
Hi Jose, thank you for reaching out. According to our research, the issue is probably with the control board, part number PS16662495. Before replacing the control board, we recommend checking the thermal fuse, part number PS3530485, and the heating element, part number PS3527790. We hope this sorts out your problem!
The sensor that results in error code D80.
What does it measure?
What is the normal reading and what measurement results in the error code D80?
For model number DLE7100W
Hi Marshal, thank you for contacting us. The error code D80 indicates that the dryer's exhaust ductwork is 80% blocked, which can cause the dryer to take longer to dry clothes or even shut down. This error code is a result of the dryer's sensor detecting insufficient airflow. The D80 error code is often caused by a clogged lint filter, a blocked exhaust vent or hose, or a damaged exhaust duct. To remove this error, we would suggest cleaning the lint filter, exhaust vent or hose, and exhaust duct. The normal reading for this error is below 80. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Bryan
March 22, 2024
My dryer will only run for 15 seconds and then it flashes a LE 1 fault.
For model number DLE7100W
Hello Bryan, thank you for contacting us. According to our research, the error code LE1 indicated a motor fault. You may need to replace the drive motor, part number PS3523290, to fix the issue. We hope this solves your problem!
I NEED A NEW DRUM, LINT FILTER & GRILL AND DRYER LINT FILTER. PLEASE PROVIDE AVAILABILITY, PRICES AND SHIPPING COSTS TO ZIP CODE 35670. THANK YOU.
For model number DLE7100W
Hello Debbie, thank you for your question. The stock status as well as timeframes for this part is located above in the part information. If you are unsure of what a stock status means, clicking on the [More Info] button will give you a definition of the stock status. Shipping costs are for you to choose on site or with an agent on the phone. The price is just for the part only. The Belt is part PS11705916. The Grill is PS12368455. The Dryer Lint Filter Assembly is part PS3527575. The Drum is part PS8747575 and is NLA or Discontinued. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
