Models > DLE2515S > Instructions

DLE2515S (ATTEEUS) LG Dryer - Instructions

All Instructions for the DLE2515S
61 - 61 of 61
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I was not getting any power when I pushed the button
First, I replaced the mail PCB board (the one that is all electronics). That didn't solve the problem. So, I replaced the PCB Board with the buttons on it. That solved the problem. Both were super easy to replace. REmoved the top of the dryer (3 screws in back). Then, I popped the control panel out of the front and unscrewed the board. The connectors were all clear (only went in one place). All-in, it took about 10 minutes for each board.
Parts Used:
PCB Assembly,Main
  • David from Walnut Creek, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DLE2515S
61 - 61 of 61