Models > DLE2101W

DLE2101W (ABWEEUS) LG Dryer - Overview

Sections of the DLE2101W

[Viewing 3 of 3]

Manuals & Care Guides for DLE2101W

Click to download
Keep searches simple, eg. "belt" or "pump".
4 PACK ROLLER ASSEMBLY – Part Number: 4581EL2002L
4 PACK ROLLER ASSEMBLY
★★★★★
★★★★★
(6)
PartSelect #: PS17269866
Manufacturer #: 4581EL2002L
This part is sold individually. The drum support roller is found in your dryer. It is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. It is recommen...
$172.74
  In Stock
Order within the next 10 hrs and your part ships today!
Dryer Lint Filter – Part Number: 5231EL1003B
Dryer Lint Filter
★★★★★
★★★★★
(13)
PartSelect #: PS3527578
Manufacturer #: 5231EL1003B
This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice t...
$84.67
  In Stock
Order within the next 10 hrs and your part ships today!
Thermal Fuse – Part Number: 6931EL3003D
Thermal Fuse
★★★★★
★★★★★
(6)
PartSelect #: PS3530485
Manufacturer #: 6931EL3003D
It is used in dryers.
$51.93
  In Stock
Order within the next 10 hrs and your part ships today!
Moisture Sensor – Part Number: 6500EL3001A
Moisture Sensor
★★★★★
★★★★★
(2)
PartSelect #: PS3529161
Manufacturer #: 6500EL3001A
$28.32
  In Stock
Order within the next 10 hrs and your part ships today!
Dryer Drum Belt – Part Number: 4400EL2001F
Dryer Drum Belt
★★★★★
★★★★★
(3)
PartSelect #: PS11705916
Manufacturer #: 4400EL2001F
This belt helps rotate from the drive motor to the drum.
$81.30
  In Stock
Order within the next 10 hrs and your part ships today!
Dryer Thermistor – Part Number: 6323EL2001B
Dryer Thermistor
★★★★★
★★★★★
(1)
PartSelect #: PS3529026
Manufacturer #: 6323EL2001B
This thermistor is used in dryer
$43.83
  In Stock
Order within the next 10 hrs and your part ships today!
Felt Seal – Part Number: 4036EL3001A
Felt Seal
★★★★★
★★★★★
(1)
PartSelect #: PS3522851
Manufacturer #: 4036EL3001A
$61.79
  In Stock
Order within the next 10 hrs and your part ships today!
Blower Thermostat – Part Number: 6931EL3002M
Blower Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS8747887
Manufacturer #: 6931EL3002M
$58.37
  In Stock
Order within the next 10 hrs and your part ships today!
Thermostat Assembly – Part Number: 6931EL3001E
Thermostat Assembly
PartSelect #: PS3530481
Manufacturer #: 6931EL3001E
The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. I...
$62.16
  In Stock
Order within the next 10 hrs and your part ships today!
Pulley,Idle – Part Number: 4560EL3001A
Pulley,Idle
PartSelect #: PS3523032
Manufacturer #: 4560EL3001A
$44.79
  In Stock
Order within the next 10 hrs and your part ships today!
Side Venting Kit – Part Number: 3911EZ9131X
Side Venting Kit
★★★★★
★★★★★
(1)
PartSelect #: PS3575086
Manufacturer #: 3911EZ9131X
$247.25
  In Stock
Order within the next 10 hrs and your part ships today!
Leg – Part Number: 4778EL3001B
Leg
PartSelect #: PS3523560
Manufacturer #: 4778EL3001B
This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer ...
$13.91
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for DLE2101W

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
January 4, 2020
When starting the dryer the “check filter” light comes on. The lint filter is clean. How do i check filter?
For model number DLE2101W
PartSelect logo
Hello Bob, thank you for your question. The display will show CHK.FILTER when the dryer is turned on as a reminder to check the filter. It turns off when the START/PAUSE button is pressed. If the button is pressed and the light doesn't turn off, unplug the unit and let it set for about 5 minutes to see if that will reset the reminder. If the issue persists, we would recommend checking the interior of the cabinet for any lint blockages. I hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Fred
January 20, 2020
How to check/replace thermistor in this model.
For model number DLE2101W
PartSelect logo
Hello Fred, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3529026. We have a How to Video on the site listed under the part number. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ransom
January 23, 2020
Our dryer will not turn off. The only way is to open the door. As soon as we close it, it starts running again. What is the problem?
For model number DLE2101W
PartSelect logo
Hello Ransom, thank you for your question. We would recommend testing the following parts. Door Switch Part Number: PS3529308, Micro Switch Part Number: PS7321762, Drive Motor Part Number: PS3523290. If those parts are fine,the issue would be with one of the control boards. However, both of the boards for this unit have been discontinued by the manufacturer.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the DLE2101W

[Viewing 5 of 5]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer making a thumping and squealing noise when running
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
Parts Used:
4 PACK ROLLER ASSEMBLY
  • Mark from WAVERLY, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
96 of 121 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run with no heat
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Parts Used:
Thermal Fuse
  • Richard from ORMOND BEACH, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
73 of 83 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screeching during operation
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
Parts Used:
4 PACK ROLLER ASSEMBLY
  • CAROL from NAMPA, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
44 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!