Models > CVDX4180W > Instructions

CVDX4180W Jenn-Air Cooktop - Instructions

All Instructions for the CVDX4180W
16 - 27 of 27
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grease filter broke
Ordered a replacement grease filter.
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Carlos from CHANTILLY, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old filter was falling apart
Just placed new filter in slot
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Elsie from OLATHE, KS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Parts Used:
Range Motor Isolator
  • alphonso from plainfield, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
As soon as the parts arived it tooks only 1 1/2 hours to get everything fixed
took the nuts off &replaced the new ignited
Parts Used:
Spark Igniter
  • Robert from Pleasanton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace old grease filter
very easy slip in
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Rita from Leesburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Kim from Cottontown, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not light
remove two screws then unplug the wires put the wires back on the new one
Parts Used:
Range Spark Module
  • ned from leland, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element was burned out
Simply removed the old element and plugged inthe replacement.
Parts Used:
Grill Element
  • Milton from Winter Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Needed new grease filter
The old grease filter was removed and the entire downdraft was cleaned. The new filter was slipped in. It is so nice to have the old one out. I am so appreciative of finding this part. :-)
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Judith from Lady Lake, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replacement filter for jenn-aire
the filter fit because the scale in the photo allowed me to choose which one to buy!
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Fred from Mount Sinai, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Parts Used:
Cooktop Downdraft Vent Grease Filter
  • Kathy from Gurnee, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Igniter switch was inop
It took longer to figure out how to get the selector cover off than it did to replace the switch. Once I had access it was only about a 10-15 minute job to install and put it all back together and operative. Actually a very easy job to do.
Parts Used:
Range Igniter Switch
  • Mark from Kingwood, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CVDX4180W
16 - 27 of 27
Back to Top