CME9010DAE Maytag Microwave - Instructions

Philips screwdriver
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.

Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/delivery was fast. No need to have spare on hand.

After using glue to repair it and living with it re-cracking for a year. I simply went on line and bought a new handle. The replacement handle arrived in two days. I removed two screws, took off broken handle and screwed in new handle and done.
The diagram of the components on the web site was easy to read and selection of the replacement handle was easy.

Watched a you tube video prior to installing new switch. Followed the video which gave me confidence i was up to the task. After removing the touch pad I found my design was not exactly like the you tube model but I found the defective switch, replaced it and put the microwave back together. Works great. Again watch the videos

Used phillips screw driver and was done in less than 5 mins.

I had a son put in the new light bulbs. Rather simple

Before I ordered the part I took the handle off and super glued it. That lasted for about 2 weeks.

Removed 2 screws and replaced the handle.

Part arrived in only 2 days.

Great service, good price

Used a screwdriver to unscrew the two screws attaching the handle to the microwave door, saving the screws. Cleaned off the surface area of the door to remove dirt and gunk. Unwrapped new handle and inserted screws through door into handle . Tightened screws as much as I could--husband used his arm strength to finish the job that evening.

Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business

Open compartment, installed bulb, closed compartment

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Replaced light bulb.

Removed the glass cover and replaced the bulb. Very simple.

First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.

removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.