All Installation Instructions for General Electric Refrigerator CFE28TP4MCW2

switch wouldn't come out anymore and turn light on

Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy

Parts Used:

LIGHT SWITCH

Cynthia from Seatac, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

refrige ws too cold

as per video

Parts Used:

Temperature Sensor

Jeffrey from Saint Charles, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

no light in freezer

Connected the 2 wires and pushed in the switch until it clicked.

Parts Used:

LIGHT SWITCH

christopher from collegeville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Fridge wouldn't keep temp

My son replaced both temperature sensors and the fridge works great now!!! Like brand new again!!!!

Parts Used:

Temperature Sensor

Richard from Nesquehoning, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

refig light did not work

per your instructions

Parts Used:

LIGHT SWITCH

paul from east hanover, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

coil frosting up and refridgerator section was not cooling

took out shelves and removed the back plate my removing 2 screws with a nutdriver.removed the old defrost timer and defrost heater which was really easy.then installed the new ones.the video i watched on the website was really helpfull.

Parts Used:

Temperature Sensor