CFD28WIQB0 Crosley Refrigerator - Parts

This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white in color and the filter has a polypropylene plastic housing and extruded carbon block filter media. Certified by NSF/ANSI to reduce contamina...Read morents that may be in your household water supply by 99.8 percent. The operating temperature for this filter is 33-100 degrees Fahrenheit, the flow rate is 0.5 GPM, the working pressure is 30-100 PSI, and it has a micron rating of 1. This filter should be replaced every six months or when the indicator lights up red. Installation is quick and easy. Push on the end face of the older filter to allow it to release. Remove and discard the old filter. Slide the new filter into the housing and press it down until it locks into place. Be sure to run water through the dispenser for about three minutes to prime the filter before use. Discard this water or use it to water plants. Do not forget to reset the indicator by pressing it down for 3-10 seconds. Review the use and care guide before you install for more detailed instructions.

This GREY magnetic door gasket is designed to help your 36-inch French-door refrigerator maintain a consistent internal temperature by forming a tight seal between the doors and the cabinet. Made from durable white material, it keeps cold air in and warm air out—helping preserve food freshness and reduce energy consumption. If your curren...Read moret gasket is worn, cracked, or no longer sealing properly, replacing it can improve your refrigerator’s performance and efficiency. This replacement part is compatible with select models and installs easily.

This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerator is leaking, or it will not produce ice cubes. Be sure to disconnect the power to your refrigerator before beginning this repair.

This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator door. This is an OEM part sourced directly from the manufacturer.

Ensure your freezer operates efficiently with this replacement drawer gasket, designed to form a tight seal that keeps cold air in and warm air out. Made in light gray and compatible with select models, it helps maintain proper temperature control and reduce energy consumption. Replace the gasket if you notice signs of wear such as cracki...Read moreng, loss of elasticity, or frost buildup inside the freezer. This part is sold individually.

This mullion hinge pin is designed to secure the mullion in place within compatible refrigerator models, allowing it to pivot smoothly as the doors open and close. Measuring approximately 1.5 inches by 1.25 inches by 0.85 inches, it helps maintain proper separation between the refrigerator and freezer compartments, supporting consistent i...Read morenternal temperatures. A damaged or loose hinge pin can lead to temperature fluctuations, frost buildup, and difficulty operating the doors. Replacement involves removing the mullion cover, detaching the old pin, inserting the new one into the hinge assembly, and reattaching the cover. Some models may require two pins—one at the top and one at the bottom. Each pin is sold individually.

Sold Individually.

This clear plastic door bin is designed to fit securely inside the refrigerator door, offering a practical solution for storing bottles, jars, and other everyday items. It helps maximize space and keeps contents organized and within easy reach. Over time, bins can crack, warp, or lose their ability to hold items safely. When that happens,...Read more replacing the bin is a quick and tool-free fix—just remove the old one and snap the new bin into place on the existing brackets.

This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base connects to your refrigerator and is the part that your two-headed water filter fits into. The main reason you would want to replace it is ...Read moreif you notice a leak when you connect the water filter, or if it is noticeably cracked or damaged. This part is sold individually and is a genuine OEM part.

The water inlet valve supplies water to the refrigerator ice maker and water dispenser. This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux. Possible Repair Solution For: Leaking water, water will not dispense, ice maker does not make ice, ice maker doe...Read mores not dispense ice. This is an authentic water inlet valve (4 coil), which works with refrigerators.

This genuine OEM evaporator fan motor is essential for maintaining consistent cooling inside your refrigerator by circulating cold air over the evaporator coils and distributing it throughout the fresh food and freezer compartments. A failing fan motor can lead to poor cooling performance, unusual noises, ice buildup, or error codes. If y...Read moreou notice these symptoms, replacing the motor can restore proper airflow and temperature control. Installation is straightforward—disconnect power, access the freezer compartment, and replace the old motor with the new one for reliable operation.

This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for re...Read moreplacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.