CEW30EF6GSC Electrolux Range - Parts

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

Dual Radiant Surface Element

The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimeter. If the element doesn’t have continuity you will need to replace the element. If it doesn’t have continuity it is suggested to check the e...Read morelement switch because it could be defective and need to be replaced. This element is 1200 watts and is a genuine OEM part. The manufacturer suggests making sure the cooking element is cooled before starting the repair. Please remember to disconnect the power to the appliance before starting the repair.

This oven temperature sensor is a precision component designed to measure and relay internal oven temperatures to the control board, ensuring accurate and consistent cooking performance. Commonly referred to as a sensor probe or sensor assembly, it plays a vital role in regulating heat by adjusting the operation of the heating elements ba...Read moresed on real-time temperature data. A malfunctioning sensor can lead to issues such as uneven heating, undercooked food, or the oven failing to reach the desired temperature. This OEM part is manufactured by Electrolux and is compatible with a wide range of Frigidaire, Electrolux, and Kenmore oven models. Installation typically involves accessing the rear or interior of the oven cavity and connecting the sensor to the control system using standard fittings.

Order quantity needed.

This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this genuine OEM fan blade works with the convection motor to circulate and distribute heat evenly throughout the oven. If your oven is not gett...Read moreing hot enough or the heat is not circulating properly, or if the fan blade in your oven has become warped, damaged, or chipped, it needs to be replaced immediately. To replace the fan blade, disconnect your range from the power and locate the fan assembly. With the appropriate screwdriver and wrench, remove any assembly covers and the securing nut from the blade. Once the nut is removed, install the new blade and secure it and re-install the cover.

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Restore your oven’s baking performance with this 3000-watt bake element, located at the bottom of the oven. It fits a variety of Frigidaire, Electrolux, and Tappan models and features a unique coil design for even heat distribution. If your oven isn’t heating correctly or food is cooking unevenly, this part may need replacing. It connects...Read more with four ¼-inch push-on terminals—check your model number to ensure a proper fit.

This kit comes with two installation screws.

This oven door gasket creates a secure seal around the door to keep heat inside the oven for consistent cooking and energy efficiency. Made from high-quality, heat-resistant fiberglass with a tempered wire insert, it offers superior durability compared to standard seals. The gasket measures approximately 80 to 84 inches in length and incl...Read moreudes 16 mounting clips for easy installation—simply remove the old seal and press the new one into place. Replacing a worn gasket helps prevent heat loss, uneven cooking, and extended preheating times.