All Installation Instructions for Frigidaire Dishwasher CDB350NW10B

Replacing grommet

Finally we laid in the tub--be sure to support the lid. The grommet could be inserted halfway. Then trying to fold the grommet back we were able to use a screwdriver to force the rest in to place.

Parts Used:

Water Delivery Tube Grommet

Jack from KENDALLVILLE, IN
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Water inlet tube had worn a hole in it

Removed old hose and went to install new hose from Part Select. Part received was not the same as advertised. It was 6-8 inches shorter than the original hose. Would not make the necessary turns because of shorter length. I even went to Video instruction on installation even though I have been in Machine repair for 30 years , this video showed using the shorter hose and when installed in the video hose also had a kink because of hose length. Had to stop repair and go to hardware store and purchase a longer hose. This purchased hose from the hardware was 50% cheaper and actually worked. I also paid for 2-3 day shipping and received part 7 days later. I am very disappointed with Parts Select and am an owner of an Equipment Rental Facility and will never utilize Parts Select again.

Parts Used:

Dishwasher Water Inlet Tubing

Michael from MARSHALL, MI
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The door springs were broken and the dorr was very heavy to open and close.

I removed the two screws and then moved the dishwasher out a little bit (about 6 inches). I pushed the dishwasher toward one side to make room for me to change the spring with my hand and repeated the same procedure for the other side. After the spring change, I turned an old dishwasher to a new one.

Parts Used:

Door Spring

Yangde from Raritan, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Plug for soap dispenser.

My future son in law did it. Looked at instructions on the app for the part. Didn't take very long.

Parts Used:

Detergent Dispenser

Janice from ELK GROVE, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

No power. Power surge took out the whole board

Just so simple take out the Phillips screws take off the cover three screws hold on the board. Un plug the connectors place the new board in and replace the screws. Simple plug and play.

Parts Used:

BOARD

Terry from BELLEVILLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Bottom door seal leaking on my dishwasher

Still have a slight leak, but I'm thinking it may just need time to seat itself.

Parts Used:

Dishwasher Door Bottom Seal

Alex from COMMERCE, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

leaked at the bottom of door.

My brother in law installed it for me. There was some difficulty finding the right angle but once we realized we needed to start at the very right side it went well. So far no more leaks.

Parts Used:

Dishwasher Door Bottom Seal

Lynda L from BRIGHTON, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The DW had no lights and would not work.

While trouble shooting the issue, noticed that all switches worked and there was sufficient power going to control board but still nothing working. Ordered new control board and with only a Phillip's head screwdriver, I was able to remove cover and control board to replace. DW works like new after the repair.

Parts Used:

BOARD

Elizabeth from LONG BEACH, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

wheels break or bend or fall off

if the wire they snap on was bent it needs to be straightend.......they just snap on. easy to install but wish they had better wheels so this problem would be solved. My 2 sons have same brand dishwashers and have same problem.

Parts Used:

Wheel & Bushing Assembly

ALBERTA from FAIRBANKS, AK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Door Spring broke

Removed the two screws that mount to count top pulled the dishwasher out to see how the spring was attached , installed the new spring and the job was done the job it took about 15 mins. to complete.

Parts Used:

Door Spring

Robert from BAY SHORE, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Old sprayer arm melted to heating coil.

Easiest repair EVER!!! You just pull the old spray arm off (be sure to keep all the smaller pieces that click it into the bottom of dishwasher) and pop the new one in. Done!

Parts Used: