CCG406L Jenn-Air Cooktop - Instructions

BOB from hartford, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Need Knobs For Electric Stove-Top

I did not have the model number and thought I picked the correct knob by the picture. I sent back the knobs and one of my knobs to see if the company can match.

Parts Used:

JUDY from HACIENDA HEIGHTS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

one of my Jenn Air knobs melted (gas range top)

pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!

Parts Used:

Gayle from Whitefish, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broke original Knob

Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.

Parts Used:

Robert from Tracy, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Burner knob replacement

Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)

Parts Used:

Peter from Foster City, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

burner knobs were melted beyond repair.

Replaced the old knobs with the new ones.

Parts Used:

Thomas from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

rear burner not working

removed two hexigon screws--removed old burner---placed new burner into stove socket--replaced two screws. Done in about five minutes. Most time used to fine right size socket to fit screws! Fast delivery--easy repair--AND it works!

Parts Used:

Larry from Washington, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Door Hinge broken

I followed the online video at Jennair.com. The repair was easy and I saved quite a bit of money. I was quoted a price of $534.00 to replace the door hinges, I did it for $96.00 including overnight shipping chargers. I am a very happy lady.

Parts Used:

Door Hinge

Antonio from Davie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Burner was not lighting

I removed the pan and then the burner assembly. Used a nutdriver to remove the old front burner. Replaced with the new part, tightened it on, and tested the new burner. Worked first time. Extremely easy. It took less than 5 minutes to replace.

Parts Used:

Luciano from Hollister, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Nroken Burnner knob

Slide the knob onto the shaft.

Parts Used:

William M. from Rock Hill, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Old burners

The issue: the burners were abused by the previous tenant, the burnt grease was clearly visible. They would hardly ignite and the smell of gas was always present.The remedy: new burners. They were hard to find, I was not completely sure about to stove model (it could be quite a search to find the right ones). There is a front burner and a back one. I was not sure from the diagram about the back one, so I called Partselect and someone answered the call right-away. The burners arrived a few days later, and they were the correct ones. The burners are not Jenn-air specific, it looks like several brand names use the same ones. The installation was extremely easy, a few hex screws. The stove is like new. I highly recommend Partselect.

Parts Used:

Alan from Scappoose, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

only one burner on the cooktop worked

Took two screws out of each burner and put new burners in and replaced the screws. A real piece of cake. and they work great. Did not even have to adjust the flames. They were all solid blue and perfect. Bill

Parts Used:

William from Chipley, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

One burner knob melted and one had a broken "stem"

Pop off the old and on with the new. Took longer to open the plastic packaging each came in than to remove & replace old knob with new.

Parts Used:

Joan from Egg Harbor, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

replacing old parts

wanted a fresh clean look on the burners since they were old and getting dirty and blackened from use. Easy to replace with new one.

Parts Used: