My Orders
C3001 Porter Cable Compressor - Overview
Models starting with C3001
Click on the best match to narrow your results.
- C3001 (Type 01) Porter Cable Compressor (A 3HP 4G SS UM 1STG 120 Compressor)
- C3001 (Type 0) Porter Cable Compressor (A 3HP 4G SS UM 1STG 120 Compressor)
- C3001 (Type 1) Porter Cable Compressor (A 3HP 4G SS UM 1STG 120 Compressor)
- C3001 (Type 2) Porter Cable Compressor (A 3HP 4G SS UM 1STG 120 Compressor)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Label Hot Surface Tr
Part #N008806
No Longer Available
Brush Motor 3HP UMC
Part #Z-A02125
This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with air compressors. The carbon brushes are used to relay electricity from the switch to the motor's armature. These brushes are priced and sold as a pair because two brushes are required.
No Longer Available
Gauge 2 OD 200PSI 1/
Part #Z-D28274
This is an original replacement part manufactured for use with Porter Cable air compressors. This gauge is used to measure the air pressure that is set by the regulator. This gauge is threaded and screws directly into the regulator and the gauge is sold individually.
No Longer Available
Fitting 90DEG Elbow
Part #SSP-537
No Longer Available
Sleeve Silicone
Part #CAC-1120
$77.89
In Stock
Connecting Rod Assembly
Part #N036518
This genuine OEM replacement kit is designed for use with select air compressors and includes essential components to restore proper function. The kit comes with a piston rod, compression ring, cylinder sleeve, and bearing—ideal for repairing worn or damaged internal parts. Please note that this kit does not include the valve plate, head ...Read moregaskets, or any other compressor components, so be sure to check your model’s requirements before beginning repairs. Installation requires basic tools: a screwdriver, hex key Allen wrench), and pliers. With these tools and a bit of care, you can perform a straightforward repair that helps extend the life and efficiency of your compressor.
Read less
No Longer Available
Oring 2.132/2.096id
Part #SSG-8169
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Read less
No Longer Available
Brush Set (2 Brushes)
Part #Z-D23825
Genuine Porter Cable replacement part Includes 2 Carbon Brushes with wire lead attached and installation instructions. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are...Read more one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
Read less
$16.74
Special Order
Valve
Part #D20114
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by te...Read morension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.
Read less
$7.44
Special Order
SCREW
Part #A19123
No Longer Available
Nipple .25NPT X 2.5
Part #D24888
$12.20
Special Order
DRAIN VALVE
Part #N286039
When using an air compressor, moisture naturally builds up inside the tank as air is compressed. If this water isn’t drained regularly, it can lead to internal rust and damage over time. That’s where the drain valve comes in—it allows you to release the built-up water and keep your tank in good condition. Located at the bottom of the tank...Read more, this valve should be opened after each use to prevent corrosion and extend the life of your compressor. If you tend to leave air in the tank for long periods, water accumulation can be even more significant. This replacement drain valve features a thread size of 18 TPI and is sold individually. Regular maintenance with a working drain valve helps ensure safe and efficient compressor operation.
Read less
Common Symptoms of models starting with C3001
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More