BTD130FW Makita Impact Driver - Parts

This is a genuine Makita replacement part used in compatible impact drivers and impact wrenches. The nylon washer fits between the hammer case and the anvil and is made of plastic. You may need a screwdriver when replacing this item. It may become broken and will need to be replaced. This item is available as an individual replacement part.

This item is a genuine Makita replacement part that has been OEM sourced to ensure quality. The rubber pin is intended to be used with impact drills/drivers, shears, and drywall screwdrivers. The rubber pin is used to provide spacing between the brush card and the housing assembly. This item is sold as a single part.

This is an authentic Makita replacement part that has been sourced from the original manufacturer for use with hammer drills. The metal pan head screw is used with several different types of drills and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.

This is a Genuine OEM Sourced replacement part designed for Makita Impact Drivers. This part is made out of Metal and it is Sold Individually. This Washer helps to provide seal for the Sleeve. When replacing this part you would need a Screwdriver and Pliers.

It is a genuine high quality item that is sourced from original equipment manufacturer for use with Makita impact drivers. This flat washer is used to provide a tight seal between two connected parts, please make sure to check appropriate diagrams of your tool for correct location and use of this item. One durable metal flat washer is included per order.

The sleeve fits between the compression spring and the hammer case. This is an authentic OEM part for impact drivers and cordless screwdrivers made by Makita. This item is available as an individual replacement. During the installation process, a screwdriver might be needed to replace this part. It is made of metal and will require replacing if it becomes broken.

This authentic o-ring is supplied by the original equipment manufacturer, it is specially designed for use with Makita impact drivers. Its purpose is to provide an air-tight seal between connected parts, please make sure to refer to appropriate diagrams of your model for the correct location and use of this hardware. Over time the materia...Read morel may wear out and crack eventually requiring a replacement to ensure the peak performance. This high-quality replacement o-ring is made of durable rubber and it is sold indiviudally.

This is a genuine Makita replacement part, it is sold individually. It is part of the bit holder. Without this Ball the bit would not stay in the holder. It is used in a number of different tools for different reasons. But it is most popular in Cordless Impact Drivers and Corded Screw Drivers. Compatible with the tools listed below. The diameter is 3.5mm.

This genuine OEM steel ball measures 5.6mm in diameter and is used in the ball bearing mechanisms or detent systems of your handheld power tools. It minimizes friction between moving parts, allowing them to move smoothly without causing excessive wear or resistance. It can also provide a reliable locking mechanism in the detent system, en...Read moresuring that adjustable parts stay securely in place during operation. Typically, you can find this steel ball inside the main housing of your power tool. It facilitates smooth rolling or sliding movements in various components like compression springs, cam clutches, barrels, or spindles. Signs of a worn or damaged steel ball include increased vibration or inconsistent locking. To check if the steel ball requires replacement, visually inspect it for any signs of wear or damage. If you are unsure about how to replace the steel ball in your machine, it is recommended to consult your user manual for instructions. Please note that this replacement part is sold individually, as your tool may need multiple steel balls. It is also crucial to make sure you have the correct size of steel ball for your specific repair.