BM4CSSACC (090432504) Homelite Trimmer - Parts

1 - 12 of 96

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Trimmer Screw (M6 X 20 Mm) – Part Number: 660697002
$5.95
Special Order
Trimmer Screw (M6 X 20 Mm)
Part #660697002
A loose upper shaft or housing may be caused by a damaged or missing mounting screw. This black metal fastener has an M6 x 20 mm thread and a Torx-style head. Check the clamp, threaded hole, bracket, and nearby hardware before installing a replacement. Match the screw to the full tool model and parts diagram because its use may differ between machines. Shut down the tool and prevent it from starting. Thread the screw by hand to avoid damage, then tighten it securely without crushing or cracking the parts it holds.
Screw (m4 X 19 Mm) – Part Number: 660968001
$5.95
Special Order
Screw (m4 X 19 Mm)
Part #660968001
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is a standard hardware which has multiple applications based on the model of your tool, please refer to the appropriate diagrams for the correct location and use of this part. It is made of high-quality metal and it is sold individually.
Trimmer Starter Rope – Part Number: 900849002
$5.95
On Order
Trimmer Starter Rope
Part #900849002
This is a genuine OEM sourced replacement starter rope, not an aftermarket equivalent. This part is used to pull start Homelite and Ryobi handheld lawn and garden equipment. This rope is made from durable fabric and it is sold individually. Please note, the grip handle is sold separately. Replacing this starter rope you will need a screwdriver.
Deflector-Grass Assembly – Part Number: 308473004
$14.95
Special Order
Deflector-Grass Assembly
Part #308473004
Edger Wing Nut – Part Number: PS02453
$5.95
Special Order
Edger Wing Nut
Part #PS02453
This is a genuine Homelite replacement part. The wing nut (1/4-20) is made of high quality metal, and is designed for use in many string trimmers. This item assists in securing the handle to the upper boom assembly. A wrench is needed to make the repair. This part is available to be purchased individually.
Hanger Cap – Part Number: 518019004
$5.95
Special Order
Hanger Cap
Part #518019004
Genuine OEM replacement part, this item is sold individually. The purpose of the Hanger Cap is to place on the end of your Trimmer shaft assemblies that have the optional of the multiple add-on attachments. When you are not using the other attachments you can hang them up and get them out of the way. You can also remove the lower shaft on trimmers that have a upper and lower shaft assembly and hang it up also.
Arborless Bump-Feed Trimmer Head – Part Number: 311759012
$21.95
Special Order
Arborless Bump-Feed Trimmer Head
Part #311759012
This arborless bump-feed trimmer head assembly is designed to restore smooth, reliable cutting performance on straight-shaft string trimmers. Made from durable materials for everyday use, it securely holds and feeds trimmer line as needed with a simple tap on the ground. Easy to install without special tools, it’s an ideal replacement for a worn or damaged trimmer head to keep edging and trimming tasks efficient and controlled.
Stringhead Bump Knob Arborle – Part Number: 530455001
$5.95
Special Order
Switch – Part Number: 760961002
$5.95
Special Order
Switch
Part #760961002
Clutch – Part Number: 300960002
$7.95
Special Order
Clutch
Part #300960002
This is an OEM sourced replacement part used on gas trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention. Please note the clutch drum, spacer and washer are all sold separately. This clutch is made out of metal and it is sold individually. To replace this item you would need a screwdriver and pliers.
Gear Head – Part Number: 308210009
$36.95
Special Order
Gear Head
Part #308210009
This Gear gear head assembly is designed to transfer power from the drive shaft to the cutting head, allowing the string trimmer or brush cutter to operate smoothly and efficiently. Housed in a durable gearcase, it supports reliable rotation and helps maintain consistent cutting performance during use. Replacing a worn or damaged gear head can resolve issues such as loss of power to the cutting head, excessive noise, or erratic operation, restoring dependable performance. A properly functioning gear head also helps reduce strain on the drive system, contributing to longer service life and more efficient trimming results.
Label – Part Number: 940654088
$5.95
Special Order
Label
Part #940654088
Label ul fire warning
1 - 12 of 96