BGGF3042KFS Frigidaire Range - Instructions

All Instructions for the BGGF3042KFS
91 - 97 of 97

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door glass cracked
  • Mike from Collegeville, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Really straightforward - just took door off of the hinges and worked taking it apart until I got to the front glass that was cracked. Took it out and put the new piece in and reversed the process. Really easy and I got to clean each piece on the way back in to get rid of some spills.
Was this helpful?
Thank you for voting!
oven took too long to heat up
  • JAONNE from GAFILED, NJ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
Controller went out after storm.
  • Jill from Murray, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Repair was easy, quick and worked perfect. Removed old controller and installed new one. Part came quick. Will use part select again!!
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
  • John from Hemet, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door . Just reverse the way you take it apart to put it back together.
Was this helpful?
Thank you for voting!
Total Loss of control panel
  • David from Larose, LA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Simply took off the back plate covering the control board. Once the cover is off unplug,unscrew and remove old or defective board. Replace with new board screw into position replug and replace back cover and thats it. As a note you will need to remove the plastic cover that shows the controls from the old one and add it to the new one. V ery easy do it yourself job!!
Was this helpful?
Thank you for voting!
inner oven door glass broken
  • Cheryl from Derby, NY
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I was unable to loosen the screws myself so I called my friends husband to help me. We watched the video together and followed the instructions. The door in the video was a bit different than mine but this repair was easy.
Was this helpful?
Thank you for voting!
Cracked inner oven door
  • Steve from Hollypond, AL
  • Easy
  • More than 2 hours
  • Pliers, Screw drivers
Removed outer glass first ,then worked my way thru to inner glass..
Was this helpful?
Thank you for voting!
All Instructions for the BGGF3042KFS
91 - 97 of 97