ASI2175GRB09 Amana Refrigerator - Instructions

Had to replace the auger drum. Went fairly smooth. The video that was linked next the part was a big help, especially when all the blades of the ice chopper came off of the shaft at once and I needed to get them back in the correct order. I did a freeze frame on the moment in the video to figure out the order.

replaced electric control board, defrost for six hours. next day (24 hours) same problem, [email protected]

removed ice bin from freezer then removed front from ice bin then all i had to do was remove e clamp from end of shaft that made it possible for me to remove the ice crusher parts then slide off the drum. all that was left was to put back together.

We took the icemaker apart, and took pictures of how it looked before so we knew how to put it back together, we were really surprised how easy it was to put back together, I will be ordering other parts from this company, I got my part in 1-2 days by Fedex, I will be telling others about this company

Repair was easy enough, take apart and put it back in reverse.

Used screw driver to pop out old switch. Used pliers to hold wire connection from fall back into slot on fridge. Inserted new swith into plug and pressed new switch back in place.

I removed the external shaft that controls the ice grinder. Its spring loaded so you have to remember how to get it back together. I removed the screws that hold the cover in place. I removed the nylon nut that holds the drum and grinder on the center shaft. I replaced the drum and reversed the procedure.

The video for the repair was very helpful and made the repair go very well. It works just like new!!

Carefully followed the unit’s manual instructions

After watching a video on you tube, the repair was very simple and easy.

auger blade was replace

shook bottle and painted waited a day and repeated

I installed a Ice Door Kit. It works Great Now!

new auger and drive wheel

We didn't know how to remove the damaged handle and attach the new one to the freezer door. We had planned calling Whirlpool's Customer Service dept. for instructions. However, we didn't need to. By looking at the handle ends my husband new what to do. He applied pressure to the old handle in a certain angle pulling it from the freezer door, and it came out easily. Then to install the new handle he applied pressure pushing against the door until it clicked right in place. The new handle attached to the door perfectly and it's very firm in place. The refrigerator looks like brand new.