Models > AQC1513TEW03 > Instructions

AQC1513TEW03 Amana Freezer - Instructions

All Instructions for the AQC1513TEW03
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
pulled switch from door ,unpluged it and then plued in new switch.
Parts Used:
SWITCH
  • Henry from Monrovia, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Overload was open
New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Parts Used:
Overload (Production)
  • richard from galena, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the AQC1513TEW03
1 - 2 of 2
Back to Top