AMV6502REW2 Whirlpool Microwave Oven Combo - Instructions

All Instructions for the AMV6502REW2
91 - 99 of 99

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
changed filters
  • Edward from Oakland, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced filter which came inrecord time.
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
  • Jocelyne from Fort Pierce, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.
Was this helpful?
Thank you for voting!
Reminder signal and message to change filter on microwave digital display.
  • Susan from North Olmsted, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws on the top of the microwave and removed top/front piece of microwave. Slid out old filter (which didn't look dirty at all) and replaced it with the new one. Replaced top/front piece and 2 screws. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
replace light blub
  • roger from palm coast, FL
  • Really Easy
  • Less than 15 mins
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this helpful?
Thank you for voting!
Replace filters
  • David F from BONITA SPRINGS, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
For grease filter, just slipped it in outside area. For charcoal filter, unscrewed the top of microwave and replaced existing filter, then screwed back the top.
Was this helpful?
Thank you for voting!
Burned out light bulb
  • Ray from Gatlinburg, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!
Microwave turntable stopped rotating.
  • Larrt from Minooka, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.
Was this helpful?
Thank you for voting!
replace filter
  • Robert from Southfield, MI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Time to replace the charcoal filter
Was this helpful?
Thank you for voting!
2 burned out bulbs under the microwave/important light source for kitchen stove.
  • Ferol from San Antonio, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.
Was this helpful?
Thank you for voting!
All Instructions for the AMV6502REW2
91 - 99 of 99