- Home
- AMV2307PFS6
- Instructions
AMV2307PFS6 Whirlpool Microwave Oven Combo - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
One of the wheels came off
1 person
found this instruction helpful.
-
Paul from EXETER, NH
- Very Easy
- Less than 15 mins
Took out turntable and swapped out old one with a new bright and shiny
New one, ring that is. It was easy using the part from parts select
Thanks
Paul
New one, ring that is. It was easy using the part from parts select
Thanks
Paul
Was this helpful?
Thank you for voting!
Burned out light bulb which lit the surface of the range.
1 of 2 people
found this instruction helpful.
-
Michael J from LORAIN, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this helpful?
Thank you for voting!
Mounting plate support edge broken
1 of 2 people
found this instruction helpful.
-
Glen from GLIDDEN, WI
- Really Easy
- 30 - 60 mins
-
Screw drivers
I removed the microwave to install a back splash and found the support edge on the backplate had broken off and was missing. I searched for parts for the microwave and found them on PartsSelect.com. Easy to order, and was shipped promptly.
Once the part arrived, install was simple, lining up the existing holes. The only hard p ... Read more art was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.
Overall a very simple repair.
Once the part arrived, install was simple, lining up the existing holes. The only hard p ... Read more art was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.
Overall a very simple repair.
Read less
Was this helpful?
Thank you for voting!
Turntable did not work
1 of 2 people
found this instruction helpful.
-
Eldon from ORANGE, CA
- Easy
- 30 - 60 mins
-
Screw drivers
Ordered a new motor. Removed the outside trim of the oven-microwave combo. 2 screws at the bottom of the trim. Removed the screws that held the combination micro and oven unit in place. Removed the top and bottom black plastic grill of the microwave. 3 screws each. Pulled the entire unit out about 1 inch exposing the screws at each
... Read more
side of the microwave that hold it in place.
Snapped off the top control panel which exposed the wiring connecting the control panel.
Unplugged a couple of wire harness units to free the control panel.
Be sure to label the units to know which goes where during reassembly.
Remove the microwave unit from the housing and place it on its side.
Remove the metal plate that houses the motor. 4 screws hold the motor in place. Disconnect the 2 wires from the old motor and you are ready to install the new motor. Be sure to TURN OFF THE POWER to the unit at the breaker box and remove the turntable from inside the microwave.
Snapped off the top control panel which exposed the wiring connecting the control panel.
Unplugged a couple of wire harness units to free the control panel.
Be sure to label the units to know which goes where during reassembly.
Remove the microwave unit from the housing and place it on its side.
Remove the metal plate that houses the motor. 4 screws hold the motor in place. Disconnect the 2 wires from the old motor and you are ready to install the new motor. Be sure to TURN OFF THE POWER to the unit at the breaker box and remove the turntable from inside the microwave.
Read less
Was this helpful?
Thank you for voting!
machine was dead.
3 of 9 people
found this instruction helpful.
-
Mark from Smithtown, NY
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "P
... Read more
art Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Read less
Was this helpful?
Thank you for voting!
Lightbulb burned out
1 of 4 people
found this instruction helpful.
-
Roland R from NORTH ANDOVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this helpful?
Thank you for voting!
None
5 of 16 people
found this instruction helpful.
-
Paul from SIERRA VISTA, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
Put in the charcoal filter buy taking two screws out and replacing.
Was this helpful?
Thank you for voting!
Broken turntable tray
0 of 2 people
found this instruction helpful.
-
Nelson from Orlando, FL
- Really Easy
- Less than 15 mins
Replaced tray. No tools needed.
Was this helpful?
Thank you for voting!
broke glass plate
0 of 2 people
found this instruction helpful.
-
Thomas C from Reminderville, OH
- Really Easy
- Less than 15 mins
Put new plate in and it was fixed
Was this helpful?
Thank you for voting!
Microwave had no electrical
1 of 5 people
found this instruction helpful.
-
Larry from HARKER HTS, TX
- Really Easy
- 30 - 60 mins
-
Pliers
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Was this helpful?
Thank you for voting!
Burnt Out Light Bulb Replacement
9 of 30 people
found this instruction helpful.
-
alfred from summerville, SC
- Easy
- Less than 15 mins
-
Screw drivers
Open compartment, installed bulb, closed compartment
Was this helpful?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
0 of 4 people
found this instruction helpful.
-
Herb from Auburn, IN
- A Bit Difficult
- 1- 2 hours
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Was this helpful?
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 people
found this instruction helpful.
-
Stephen from SPRINGFIELD, WV
- Very Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
Burned out lightbulb
-
Paul from Norristown, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One
... Read more
would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.
Read less
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
-
Jocelyne from Fort Pierce, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with
... Read more
a fan.
Read less
Was this helpful?
Thank you for voting!