AG202MB Jenn-Air Range - Overview

Models starting with AG202MB

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Front Burner Assembly Black (Glossy Finish) – Part Number: WP7505P283-60
$328.81
Special Order
Range Front Burner Assembly Black (Glossy Finish)
★★★★★
★★★★★
(3)
Part #WP7505P283-60
This nine-inch black burner fits right onto the front of your gas range and helps deliver even heat while you cook. It’s built to last and designed to work smoothly with your appliance. If your current burner is worn out or not heating properly, this replacement can help restore performance. Just make sure it matches your model before installing.
Rear Burner – Part Number: 74005189
$264.50
In Stock
Rear Burner
★★★★★
★★★★★
(2)
Part #74005189
This glossy black burner sits at the back of your stove and helps deliver steady heat while you cook. It guides the gas to the burner head so your meals cook evenly. If your rear burner isn’t lighting or heating properly, this part could be the fix. It’s a direct replacement and easy to install—just make sure the stove is off and disconnected before starting.
Double Burner Pan - Black – Part Number: 3401X055-09
$255.64
Special Order
Double Burner Pan - Black
★★★★★
★★★★★
(1)
Part #3401X055-09
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Gas Two Burner Module – Part Number: AG202MBA
$679.93
Special Order
Gas Two Burner Module
★★★★★
★★★★★
(3)
Part #AG202MBA
Manufacturer's Number: AG202MB Porcelain-on-cast-iron burner grate for Designer Line and Pro-Style models. Designed for gas cooktops and Dual-Fuel ranges. Black with black grates, also available in grey. 8,000 BTU burner. Note: This model has been replaced by a newer model which is incompatible. If your cooktop has a large gas supply spike which projects into the center of the cartridge then this is the correct cartridge for your needs. If your cooktop is a newer model it will not have the gas supply spike in the middle of area where the cartridge goes. If this is the case, you should purchase the JGA8100ADBB instead. Works with the following models: CVG4100 | CVG4280 | CVG4380 | CVG4380P | JGD8348 | SVD48600 | May not be exactly as shown.
Aeration Pan – Part Number: 3401X055-81
$275.83
Special Order
Aeration Pan
Part #3401X055-81
This pan sits under the burner to catch anything that may spill over to make cleaning up spills quick. Also known as double burner pan.
Range Burner Bracket (Black) – Part Number: WP3801F403-80
$63.75
Special Order
Range Burner Bracket (Black)
Part #WP3801F403-80
This bracket supports the front and rear burner assembly.
Grate Kit – Part Number: 12001428
No Longer Available
Grate Kit
Part #12001428
This includes 2 medium-sized burner grates. NOTE: The manufacturer has changed the color. It is recommended to replace both grates so the color will match.
Burner Grate - black – Part Number: WP71003089
$202.60
In Stock
Burner Grate - black
Part #WP71003089
This burner grate is eleven and a half inches long. It is all black in color and is made of an iron/metal material.
MODULE – Part Number: AG202MGA
No Longer Available
MODULE
Part #AG202MGA
Porcelain-on-cast-iron burner grate for Designer Line and Pro-Style models. Designed for gas cooktops and Dual-Fuel ranges. Grey with black grates, also available in black. 8,000 BTU burner.
PAN, AERATION (WHITE) – Part Number: 3401W055-81
No Longer Available
PAN, AERATION (WHITE)
Part #3401W055-81

Exact Part matches for your search term

Gas Two Burner Module – Part Number: AG202MBA
$679.93
Special Order
Gas Two Burner Module
This part number matches the current model number AG202MB
Part #AG202MBA
Manufacturer's Number: AG202MB Porcelain-on-cast-iron burner grate for Designer Line and Pro-Style models. Designed for gas cooktops and Dual-Fuel ranges. Black with black grates, also available in grey. 8,000 BTU burner. Note: This model has been replaced by a newer model which is incompatible. If your cooktop has a large gas supply spike which projects into the center of the cartridge then this is the correct cartridge for your needs. If your cooktop is a newer model it will not have the gas supply spike in the middle of area where the cartridge goes. If this is the case, you should purchase the JGA8100ADBB instead. Works with the following models: CVG4100 | CVG4280 | CVG4380 | CVG4380P | JGD8348 | SVD48600 | May not be exactly as shown.
CARTRIDGE – Part Number: AG202MB
No Longer Available
CARTRIDGE
This part number matches the current model number AG202MB
Part #AG202MB

Common Symptoms of models starting with AG202MB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
no repair just needed a cartridge
11 of 12 people found this instruction helpful.
  • Bonnie from Stillwater, MN
  • Really Easy
  • Less than 15 mins
The cartridge came in the mail in just a few days (Thank you for such prompt service) I took the old one out and put the new one in, and now I have the 4 burner stove top that I've wanted for a long time. I was so happy to find your company and find the part I wanted. I had tried Jennair, with no luck, and it was wonderful to find your website and find exactly what I needed.
Was this helpful?
Thank you for voting!
Wanted to replace grill assembly with double burner assembly
8 of 9 people found this instruction helpful.
  • Marian from Milton, GA
  • Really Easy
  • Less than 15 mins
Removed the 2 grates and drip pan. Then removed the grill heating element which just slid out. Slid the new double burner assembly into place. Replaced the new drip pan and grates! Very Easy!!
Was this helpful?
Thank you for voting!
I wanted 4 burners. I only had 2 plus a grill that we never used. So after calling all around to buy 2 more burners with no luck, I went on line, after two other web sites that wanted over $300.00 for them all in pieces, I found PartSelect they wanted only $199.00 and it was all together in one piec
8 of 13 people found this instruction helpful.
  • Debbie from Modesto, CA
  • Really Easy
  • Less than 15 mins
Took the grill part out by hand and replaced it with the burner part by hand, took less then 2 min.
Was this helpful?
Thank you for voting!