AG202MB12 Jenn-Air Range - Overview

Diagrams for AG202MB12

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Front Burner Assembly Black (Glossy Finish) – Part Number: WP7505P283-60
$328.81
Special Order
Range Front Burner Assembly Black (Glossy Finish)
★★★★★
★★★★★
(3)
Part #WP7505P283-60
This nine-inch black burner fits right onto the front of your gas range and helps deliver even heat while you cook. It’s built to last and designed to work smoothly with your appliance. If your current burner is worn out or not heating properly, this replacement can help restore performance. Just make sure it matches your model before installing.
Rear Burner – Part Number: 74005189
$264.50
In Stock
Rear Burner
★★★★★
★★★★★
(2)
Part #74005189
This glossy black burner sits at the back of your stove and helps deliver steady heat while you cook. It guides the gas to the burner head so your meals cook evenly. If your rear burner isn’t lighting or heating properly, this part could be the fix. It’s a direct replacement and easy to install—just make sure the stove is off and disconnected before starting.
Double Burner Pan - Black – Part Number: 3401X055-09
$255.64
Special Order
Double Burner Pan - Black
★★★★★
★★★★★
(1)
Part #3401X055-09
This pan sits under the burner to catch anything that may spill over to make cleaning up easy. Also known as Aeration Pan. Sold individually.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Burner Bracket (Black) – Part Number: WP3801F403-80
$63.75
Special Order
Range Burner Bracket (Black)
Part #WP3801F403-80
This bracket supports the front and rear burner assembly.
Grate Kit – Part Number: 12001428
No Longer Available
Grate Kit
Part #12001428
This includes 2 medium-sized burner grates. NOTE: The manufacturer has changed the color. It is recommended to replace both grates so the color will match.
Burner Grate - black – Part Number: WP71003089
$202.60
In Stock
Burner Grate - black
Part #WP71003089
This burner grate is eleven and a half inches long. It is all black in color and is made of an iron/metal material.
PAN, AERATION (WHITE) – Part Number: 3401W055-81
No Longer Available
PAN, AERATION (WHITE)
Part #3401W055-81

Common Symptoms of the AG202MB12

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
20 year old burners were slow to light and hard to adjust for our propane fired stove. And, they were scratched and ugly
6 of 7 people found this instruction helpful.
  • thomas from Goodrich, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed four screws; withdrew two burners; set two new burners in place; installed same old screws. That was it. When I turned them on to adjust the flame, they came on almost instantly and no adjustment was needed.

Wife loves the nice new look.
Was this helpful?
Thank you for voting!
Part arrived broken.
5 of 5 people found this instruction helpful.
  • Thomas from HOLLISTON, MA
  • Very Difficult
  • 30 - 60 mins
Contacted customer service via email. Included a description of the problem as well as a photo that clearly showed that the Front Burner Assembly was, in fact, NOT an assembly when it arrived.

Nobody even acknowledged my email.
This was a $140 assembly.

Never again will use these guys for repair parts.
Was this helpful?
Thank you for voting!
This item needed replacement for the 3rd time due to finish wearing off, within 6 months EACH time.
2 of 2 people found this instruction helpful.
  • JoAnn from Raleigh, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unscrewed previous unit, placed new unit and screwed in place.
Was this helpful?
Thank you for voting!