AFC2033DRW Amana Refrigerator - Parts

This replacement end cap supports the pantry drawer on the right side of your refrigerator, helping it slide and stay in place properly. It mounts to the inside wall and is essential for keeping the drawer stable. If your current end cap is cracked or broken, this part is a simple fix. Be sure to unplug the refrigerator before installing, and refer to the included instructions for guidance. Sold individually.

The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the drawer section is too cold, you may need to replace the lid. The pantry drawer lid is a genuine OEM part.

This modular ice maker assembly replaces worn-out units to restore ice production in refrigerators. It includes the ice mold and control device but excludes the cover, ice level arm, wire harness, and mounting hardware, which must be reused or ordered separately. Unplug the refrigerator before installation and use work gloves for safety. Check compatibility with your model number before purchase.

This left-side pantry end cap, also referred to as a drawer support or door shelf trim, is designed to secure items on the interior door shelf of your refrigerator. Sold individually, it snaps into place on the left side of the door, providing structural support for the shelf and ensuring stable storage. Installation is straightforward an...Read mored typically requires a 1/4-inch nut driver. Users report the repair process as simple, with an estimated completion time of under thirty minutes. This component is ideal for replacing a damaged or missing end cap to restore full functionality to your refrigerator’s door shelving system.

Door switch turns the light off when you close the door.

This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencing issues such as inconsistent temperatures, failure to start, prolonged operation, or ineffective defrosting, replacing the control board ma...Read morey resolve the problem. Installation requires a small flat blade screwdriver and should be performed with the refrigerator unplugged to ensure safety. Please note that this board must be programmed after installation to function correctly. For precise installation steps and programming instructions, refer to the manufacturer’s manual specific to your refrigerator model.

This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.

If the door shelf bin in your refrigerator is cracked, missing, or no longer holding items securely, this clear plastic replacement bin may be just what you need. Designed to fit inside the refrigerator door, it provides convenient storage space for jars, bottles, condiments, and other small items. Featuring a transparent body with a whit...Read moree trim along the top edge, it blends seamlessly with most interior styles. Measuring approximately 14 inches wide, 3.5 inches high, and 7.75 inches deep, it offers a snug and functional fit for select refrigerator models. Be sure to verify your appliance’s model number to ensure compatibility.

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this p...Read moreart is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.