All Installation Instructions for Amana Refrigerator AFB2234WES4

The drawer glides were broke.

Couldn't have been easier. Took around 5 minutes. All you have to do is remove 4 Phillips head screws, put on new drawer glides, put the screws back in and your done.

Parts Used:

Deli Drawer Glide- Left Side

Refrigerator Deli Drawer Glide

Greg from WAKEMAN, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Had to replace the pivot block and vertical rail

Couldn't be easier. Swapped out the old parts with the new. 3 screws total. Perfect fit. Like we have a new fridge now.

Parts Used:

Refrigerator Pivot Block

Refrigerator Vertical Mullion Rail - Black

Myles from BETHLEHEM, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken Draw Guide

Simple! Remove and replace two screws.

Parts Used:

Deli Drawer Glide- Left Side

Refrigerator Deli Drawer Glide

Clayton from DUVALL, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Cracked humid drawer

Complete replacement of the plastic drawer.

Parts Used:

Refrigerator Crisper Pan

Julie from BATH, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

When the support frame broke we threw the entire system into the trash DUH !

Thanks for the video showing how to replace the Humidity Slide the knowledge that the end with the flair needed to be slightly bent to SNAP into place was a big help.

Parts Used:

Crisper Shelf Front Trim - White

Refrigerator Humidity Control Slide

Bruce from CLARKSVILLE, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Repaced the right-side door light switch

Killed the power to the fridge. Then, used a small, thin screwdriver to depress the clip on the bottom of the switch and wriggled the old switch out. The two wires easily came off the contacts with pliers. Connected the wires to the new switch and snapped it into the hole--clip facing down and contacts facing up. Turned the power back on and checked the switch. Worked perfectly! Easy job.

Parts Used:

Refrigerator Switch

Charles from SEGUIN, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Ladder hooks broke

Pulled out broken parts and snapped/ pushed into place new ladder hooks 15 min max

Parts Used:

Crisper Drawer Cover Support

Miguel from ESCONDIDO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Vertical mullion rail broken

backout one screw, push mullion up and free from upper and lower slotted tabs, disconnect one electrical connector. Reverse the steps to reinstall. Literally took 2 minutes.

Parts Used:

Refrigerator Pivot Block

Refrigerator Vertical Mullion Rail - Black

David from Massena, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The vertical mullion rail went bad

I left this broken rail hang off my refrigerator for almost a year I finally decided to investigate the possibility of ordering the part on line. I found the part on line in minutes and when I received the part it literally took me 3 minutes to install.

Parts Used:

Refrigerator Vertical Mullion Rail - Black

Ed from OCEAN CITY, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The center rail was broken

The part just snapped in. super easy.

Parts Used:

Refrigerator Center Crisper Drawer Slide Rail - White

Joella from THE DALLES, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Rear mount tab broken on Center Crisper Rail

It took longer to empty the glass shelf above the Crisper Bins than to replace the rail. Since the part simply snaps in place, no tools were required

Parts Used:

Refrigerator Center Crisper Drawer Slide Rail - White

Joseph from Live Oak, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broke shelf holder hook

This is the small part that is critical to having a fully usable refrigerator but one that no one (even an authorized shop) has in stock. Just pop it back in, and you're done.

Parts Used:

Crisper Drawer Cover Support